Q50 M Style Mirrors and Sequential Signals Install

Discount mentioned in video expired in 2020.
A long but detailed video installing these mStyle mirrors from @jaliscos_carbonfiber and a new set of sequential turn signals.

Some Links provided are affiliate links and purchasing through them may result in this channel earning a small commission, at no additional cost to you. These links may include the Amazon Affiliate and eBay Partner Network.

[jersonmancebo]

Thank you so much don’t stop doing videos on the q50.

[aficionadohiend]

Hi, I just found that heating a little bit the plastic covers of the mirrors with a heatgun helps a lot to remove them without breaking any clip.

[seanjackson]

I spliced the wires and used tape. Never even thought about using the connectors. Then I used t-taps to connect to the wires for the plugs

[RKEV]

best video yet every other video i’ve seen people crack the tabs on their oem mirror caps

[Sunnybeast]

you see the drl stay on, I didn’t want them to stay on so there’s a way where they only turn on when you open the door more of like a welcome light pretty sure you tap it into the door light still thing that way it turns off when the car turns on, neat feature love it

[itsreallyghost]

So basically remove the mirror first then do everything else if you want the daylight running led

[thaiblkman]

I ordered mine from Amazon too, and you were right they had 2 left a the time..they come in Monday

[Hondacbrrrish]

First like!!! Lol. Love those mirror caps and saving up on the the steering wheel for the g37s 🤙🏽

[jittspatel]

Knocking mine off tomm, thank you for this🙌🏾

[eternal]

Thanks for the video bro. Will be installing mine tomorrow Saturday June 12th 2021

[eternal]

Thanks for the video bro!! Just install mine!!

[DG-]

The black wire that u connected to the grey wire inside door(ground). Cant u just ground it to a bolt?

[duskmike]

I just bought these and needed an install video

[frankrodriguez]

Nice video but I need to know how to put the white light on.

[BehindMyVisor]

fishing these wires through has not been easy lol

[hisdr]

I plugged everything how you showed it in the video and at the end I tried plugging in the pins into the factory wires but the drls didn’t turn on any advice?

[imbeasting]

couldn’t you have put the wires into one side of the harness then just strip the other side? thank you for the video though! installing along the video 🤟

[anthonytorres]

I have these same lights had them installed by a autobody shop the turn signals work but they aren’t on all the time when it’s dark how can I change that

[MikeyBLive]

It seems they changed alil since this video. I was watching yours and following along but my wires for the turn signals only are white and black instead of red and black. Ordered from Jalisco as well. I hooked those in and nothing turned on. Contacted him seeing what’s up. Hooking up the rest for the daytime running tmr. The wire colors are different now though.

[joseg]

Installed my mirror caps today, the bottom clips broke off on both my old mirror caps but I didn’t need them Anyway. But I kinda had a hard time prying them open and scratched up the actually mirror housing, a little bummed out but it’s not the worst