P0470 P0471 Mercedes Exhaust Pressure Sensor Fault

preview_player
Показать описание
Mercedes A180 EML Light On and fault codes P0470 P0471 Mercedes Exhaust Pressure Sensor Fault If you find these videos useful and you want more, please consider joining and becoming a supporter
Рекомендации по теме
Комментарии
Автор

Hi, I took this to a mechanic who managed to snap the pipe from the exhaust manifold as he claims it was seized due to the temperature cycles it experiences. How common is this and is it a big job to tap out the broken piece of pipe that's stuck in the manifold?

aadilpatel
Автор

Great video. Many thanks.

I have a good earth. 4.9v ref. But nothing on the 3rd wire. Should I have 12v there? You ever come across bad wiring ? Mines on a merc citan but I think it should be a similar setup it’s all got the diamond of doom stamped all over this too

aiden
Автор

How complicated was the pipe replacement? Did you try to clean the pipe (ex. by inserting a cable into the hole) before replacing it?

maxpuleo
Автор

I have a mercedes c220 class 2013. It has the engine light on and when I took it to a garage it was "exhaust back pressure sensor 1 has malfunction.the signal offset is outside the permissible range". Can I drive the on long distance (60 miles)? I have an appointment at a garage on Sunday, but I'll need to go somewhere before that. Thank you.

P.s. where are you based?

anonim-vzsf
Автор

Hi, helpful video, thanks. I have an issue with the exhaust back pressure sensor on my 2011 Mercedes e350 cdi with the om642 265 engine. If I replace the sensor does the ecu recognise it? I ask because I had an issue after changing the air filters and replacing the 'batwing' maf sensor.

howardkelly
Автор

Hello
I have a 2017 mercedes vito van. Keep getting this fault code for back pressure sensor. Been into garage & had new sensor & pipe etc fitted (pipe had snapped) 2 days later light was back on with same fault. Back to garage & had DPF flushed out & did a DPF regen.
Light back on with same fault code next day. Any idea what else we can try?

carolinewalker-jups
Автор

The pipe is so expensive (175 ive been priced but found it on ebay for 130. Do you have any suggestions where to buy the sensor from as I can't find the same sensor anywhere online? Also what are the consequences for not resolving this issue?

aadilpatel
Автор

Ive replaced back pressure sensor on my sprinter but still getting p047162 code.... so it could be a clogged pipe from sensor to DPF right? Many thanks

titus
Автор

Hello guys,
I have the same problem, back presure sensor on a b180.
Just bought the car so im afraid if the problem is wider than just the sensor. Is it usually just a bad sensor or does it mean anything worse?

Kuki_ogl
Автор

Mercedes ML350 Bluetec (W164?) displays check-engine light. I use a iCarsoft MBII scanner. If I use Mercedes category then read no fault code. If I use OBD II category then read P0471 fault code. I have replaced a new sensor and checked the sensor's wiring 1(5v) 2(ground) 3(signal) are all ok. I use a multimeter measure pin-3 and get 0.82v when engine is not running, and get 0.86v when engine is running. The car shows engine hesitation problem when driving. Turn off key, turn engine on again, then the problem is gone sometimes. Any thoughts? Appreciate any suggestions.

The P0471, P00AB fault codes are permanent now. How can I clear them?

allroc
Автор

I'm a bit confused, surely the pressure should increase and not drop as there's no relief right or am i missing something?

aadilpatel
Автор

Could you do a video on replacing the pipe?

aadilpatel
Автор

Ciao amico ho un problema con la mia mercedes classe A ho la spia motore accesa con errore P0475 mi puoi aiutare quale potrebbe essere il problema ? La macchina funziona bene ! 🙏🏻

RenatoHaxhi
Автор

I have the same problem on my 180d after i instal sport air filter it shoved sensor A and B

Anzoo
welcome to shbcf.ru