Good tools, easy use at home

Good tools to make your​​ job easier and more efficient.

[Janue_]

Just in case you need to torque your drywall screws to 500 ft lbs.

[jamesrussell]

Perfect! Now I can destroy my hex bits on the very first screw!!

[jonsears]

I think you might want to put the other two screws back in.

[scorpionregent]

Can't wait for FunkFPV's take on this one.

[justinmccreary]

An yes. Finally a hack to torque my deck screws to 510ft-lbs

[OneRoomShed]

Ah, so this is how that guy breaks all of those screw heads off and then makes videos about diy broken screw removers.

[nishantchaturvedi]

A friend in need is a friend indeed, A Machine can help Another Machine 😅😅😅😂😂😂

[newmrj]

Just in case you need to torque a Fastener all the way through your transfer case into the bellhousing of the transmission straight to the engine crankcase and through the front radiator. What can I say!

[vincethomrenaissanceman]

Somewhere there's an impact driver missing a piece 🤫

[dmazter]

If only they invented adapters for this...

[mdsank]

You could save the trouble and simply use the right tool for the job

[lincolnbliss]

Milwaukee introduces this feature to their 1/2 impact. Screw extraction sets triple in sales at harbor freight

[HudsonFamily]

Now you'll be able to counter sink those screws to whatever depth you want through any wood you want

[alphahelper]

Ahh yes it’s always a great idea to be using an impact gun that’s missing 2 of the 4 screws holding on the cover. If it’s missing any screws put it aside to be repaired and replace missing parts

[SohailAhmad-qjli]

Perfect! Now I can destroy my hex bits on the very first screw!!

[rodneytherd]

Thank you so much this has changed my life in every way possible

[alejandrogonzalez]

That impact wrench cost less then a milwaukee 2ah battery

[fertilbendjy]

Was I the only one trying to kill the ant that was walking? I thought it was on my screen. 😂😂

[elrondmcbong]

First. why do this if you already have the right tool for the job at hand.
Second, there's a reason why impacts don't take bits, it has tohdo something with torque, much, to and way, i guess.
Third, the 1/2" attachment isn't hollow out of the same reason.

Long story short, this will obliterate all of your hex bits and shear off if you try to loosen a really tight screw. And i'm pretty sure they know this very well therefore they just turn it freely and don't try to loosen or tighten an actual screw. A average impact can produce more peak torque than most cars and impacts like the Makita DTW1001RTJ (1050Nm / 774ft. lbs.) or the DeWalt XR DCF899NT (950Nm / 700 ft. lbs.) wich is a good bit more than a Hellcat and you won't tell me, that a 6mm hex rod can take such raw power, that isn't even linear but oscillating.

[Cyberdynemodel]

That'll torque down some screws 🤪