PADI IOT Stamp | Getting Started | AT Commands with PC

The IoT Stamp module is powered by Realtek RTL8710AF ARM Cortex M3 WiFi SoC running at 83 MHz. This module features same form factor and GPIO layout as of ESP8266 but lacks ADC input.
But it features
Up to 1x SPI @ 41.5 Mbps max
Up to 3x UART with 2x up to 4Mbps, 1x @ 38400 bps
Up to 4x PWM
Up to 1x I2C @ 3.4 Mbps max
Up to 19 GPIOs including 10 supporting interrupts. And it comes with 1 MB of flash and 512 KB of RAM.
---------------------------------------------------------------------------------------------------
Used Commands:
AT
ATSR
ATSY
ATPW=1 //Station Mode
ATWS// Scan Wifi
ATPH=2,2// Mode AP 1/STA 2, Enable:DHCP 1/STATIC 2
ATPE=192.168.0.5// Static IP ATPN=weargenius,omisoksbwn// Connect to AP

ATW?// Wifi Info

ATPG=1 // Auto COnnect 0: Disable 1: Enable
ATPC=0,192.168.0.1,80 // Create TCp Client
ATPI// Connection Info

ATPR=1,20// rECEIVE dATA ATPD=0//0 FOR ALL OR conn_id
ATWD // Disconnect from AP
---------------------------------
Resources from Pine64 Website:

********************************************************************

Guys Subscribe to my channel for latest contents into your inbox.
Support me to keep going.

___________________________________________

-~-~~-~~~-~~-~-
Guys you can buy your products from Amazon by using the following link. Wach product you buy we will get some tip out of it. And for this you don't need to pay anything extra and offers will remain same. This will help us to make videos like this and maintain the channel.

Thanks
Team WG

-~-~~-~~~-~~-~-

[ericlawrence]

Really hard to understand you, subtitles would be awesome

[sagarchowdhuryu]

please add subtitles, very nicely explained keep the good work up

[dinetsandrew]

Hellow from 2020! As I think, this module not in production today.

[kraluxGmail]

Use only <CR> and not <CR>+<LF> at the end of your lines and you won't see the spurious message "Error:command should start with an 'A'"

[pranaynaskar]

brother can i use web server code in this mcu like esp8266....

[chrispy]

Can anyone help me with getting mine to work please? I can connect to it but after I type any commands at the command prompt I get back the message: "[MEM] After do cmd, available heap 60656"

Can anyone help please? Thanks.

[sachingowda]

Man you are great !!!! You deserve more subscribers !!!!

[sagarchowdhuryu]

please make more videos on PADI IOT Stamp