Corvette Stingray How To Vortech Supercharger Oil Change

preview_player
Показать описание
SUBSCRIBE FOR MORE AWESOME VIDEOS! Click below for video details.

Corvette Stingray How To Vortech Supercharger Oil Change

This is a step by step instructional tutorial on how to change the oil on your self enclosed supercharge unit. Its a very easy Corvette Stingray how to supercharger oil change and anyone can do it with just basic tool.

Synthetic lubricant for V-3 superchargers and as well as Paxton units. This special fluid is required for proper maintenance of the superchargers. Use of any other fluid will void the warranty and may cause component failure.

Ensure that the .06" copper sealing washer is located on the dipstick base.
Thread the clean dipstick into the unit until it seats.
Once the dipstick has seated, remove the dipstick from the unit. Fluid should register in the crosshatched area on the dipstick.
DO NOT OVERFILL!! Drain excess fluid from the unit if it is above the maximum level on the dipstick.

Check the supercharger fluid level using the dipstick at least every 2,500 miles.
Initial supercharger fluid change must be performed at 2,500 miles. The supercharger fluid must then be changed at least every 7,500 miles.
Drain the fluid, re-fill the unit only with 4 oz. of Vortech/Procharger supplied lubricating fluid.
Confirm proper oil level using the dipstick. DO NOT OVERFILL.

*After the oil change has been done. If after hard driving, some misting and oil sprays out of the unit on to your engine bay.. that is completely normal. Just wipe off that access and eventually it will stop misting when it has leveled. This is caused due to pressure in the supercharger and it being slightly over filled after the oil change*

YouTube Channel

Instagram

Facebook

E-Mail
Рекомендации по теме
Комментарии
Автор

If you found this video informative, hit the like button and subscribe to the channel.

StreetProduction
Автор

Is gm supercharger oil safe to use on a vortech V3 supercharger?

phillipgarrow
Автор

Can the oil go into either of the top screws or does it have to be the lower one?

ZPR
Автор

i have a ecs super charger that looks justr like the one you have but was wondering can i use the same oil you are using ?

TheRockmart
Автор

I noticed you have a catch can on the driver vent, do you have a similar one on the passenger side?, how did you secure it to the car?

jrbust
Автор

That’s a super clean install did you do that yourself or what shop did it

HighSeasFriendsTravel
Автор

Thanks for the video. I have the same kit, and I notice when I top off the engine oil I start pushing oil out of the blow off valve. You have a catch can, what one is it? And you think that would fix my issue? I am running 9psi on 3.6 pulley. Thanks

badassg
Автор

Man this is a good vid! Hopefully it gets a ton of views

noblevengeance
Автор

Hey dude do you have a wideband AFR? If so what numbers do you show at idle?

kickinaddiction
Автор

cool. I think I might give this a go next time myself...

jrock
Автор

I'm getting a strange noise today when I shut my car off warm it was making a kind of sizzling blow off noise under the car I don't know if the condensation from the air conditioning was dripping on warm engine I have the same exact supercharger on my Z51 that you have in the video

phillipgarrow
Автор

Amier is the oil change on the Z06 the supercharger the same as your car?

johnfriday
Автор

Hey man, my oil dip stick seems to be inside the unit. How did you get it out?

negativesplits
Автор

What is the name brand of the supercharger ?

phillipgarrow