VS RACING 44MM WASTEGATE SPRING TEST AND OVERVIEW

Here is the stuff I use !

[BoostedEP]

I'm sure you've already figured this out, but the springs are designed to be stacked. Ie; 5psi spring + 7psi spring will get you approx 12psi. Stack them all in there and youll get around 18psi. It just gives the user flexibility in setting their target boost.

[juiced]

I have the same one 👍🏻
Tho I used the brass washers on the banjo fittings one at the top and bottom the block off screws just screwed in .
Thanks for the vid I tested mine and no leaks and popped off at 6 open at 7
I'm just gonna add a boost controller for easy measure 👍🏻

[BadLuckGarage]

Great video. Just something to take into consideration though, the wastegate will also open sooner depending on the amount of backpressure you have. As an example, my 5.8lb spring opens at around 4lbs on the vehicle because I have an undersized turbo and the backpressure forces it open earlier. Whereas if I had an appropriately sized turbo it wouldnt open till around 6psi. Bottom line is most of the time it wont act the same on the vehicle that it does off the vehicle with a test rig like this. 😉

[HammerHeadGarage]

These are good for spring changes compared to the split clamp pita one I have.

[marcozamo]

Is it normal for the fire ring to move in when the valve opens? (see 6:20 for example...) Thank you

[BoostedMonkeyg]

For some reason I think there is something wrong with this firing seat ring, The firing seat ring shouldn’t move at all the valve is the one should be doing all the motion.

[gatiepiegpkleynhans]

Howzit man I've got a question I've got this same gates I've put in the 2 bigger springs but when i pupe it up on the low boost port it only produces 0.5bar /7psi should I directly pipe it on the top side rather meaning on spring pressure it will boost 14psi and if I open the regulator to the top side I'll reach 28psi

[DONUTSKIE]

Im trying to find an alternate for my broken tial 44mm ewg, I run 45psi and 800hp. You think this will hold?

[moparya]

If this is a tial clone, will tial springs work in ir?

[Jakelfin]

Springs should be stacked so you get right pressures.

[kelvinleong]

I just buy a new single spring rate 1.3bar it works, if double up will increase my boost?

[jjwindell]

Do they sell replacement diaphragm for them for serving later ?

[rogergm]

I thought that the smaller spring was the highest psi! Now for what I see is that the widest spring is 6psi, the intermediate in width is the 7psi and the smallest in diameter and height is the 4psi. Can anybody correct me?

[Geemoney]

Where did you buy the VS waste gate from ?

[kansasbondboat]

Can you clock the lid any way you want?

[gregg]

Can you provide any information on the regulator and gauge setup. Having trouble finding a 30-40 psi gauge. Any information would be appreciated!

[gx]

so is this the vs racing from summitracing or ebay ?

[pablomarquez]

What if you add 2 or all 3 springs? Will it increases the psi?

[Bvillegt]

Good video, I liked it... Subscibed to your channel now..

[armdropoh]

not any different than the ebay stuff same stuff.