#603 NanoVNA Measurements of Various Power Splitters

preview_player
Показать описание
Episode 603
Measure insertion loss and isolation of various power dividers/splitters. Insertion loss is the drop in signal from input to one of the outputs. Isolation is the drop from output to output.
Be a Patron:
  1. IMSAI Guy
  2. s100
  3. s-100
  4. cpm
  5. cp/m
  6. cpm80
Рекомендации по теме
#603 NanoVNA Measurements 0:08:58

#603 NanoVNA Measurements of Various Power Splitters

#495 NANOVNA Measurement 0:16:22

#495 NANOVNA Measurement of Directional Coupler

#593 SMA Load 0:14:31

#593 SMA Load Improved and NanoVNA Measurements of Several Loads

Analysis of a 0:01:46

Analysis of a small 49:1 RF transformer with an s2p file extracted from a nanovna-H VNA.

Prolong the usable 0:08:54

Prolong the usable life and modernize your outdated VNA with Insight

Nanovna-F 0:00:21

Nanovna-F

1 3 Power 0:14:56

1 3 Power Divider Return Loss VSWR Smith Chart Impedance Power Division and Isolation Characteristic

Test of a 0:02:49

Test of a chinese RF attenuator ( 10 watt / 30 dB / 3 GHz)

2 way splitter 0:07:15

2 way splitter revised ! Cheap and good? Yes!

NanoVNA: Testing Coax 0:22:52

NanoVNA: Testing Coax For Characteristic Impedance And Distance To Fault (Length)

Using the nano 0:10:34

Using the nano vna as a TDR (time domain reflectometer)

nanovna 0:00:42

nanovna

How To Measure 0:22:31

How To Measure RF System and Cable Loss For Under $100

NanoVNA v1 Case 0:00:19

NanoVNA v1 Case in the making pt2

Demo Insertion loss 0:02:14

Demo Insertion loss measurement RF signal

How to Measure 0:00:58

How to Measure Coaxial Cable loss

#1390 Pulling dents 0:05:59

#1390 Pulling dents in SMA connectors

Making Microwave RF 0:20:58

Making Microwave RF measurements & Calibration of a 4 port Scalar VNA PART 1

Нахождение значения индуктивности 0:03:33

Нахождение значения индуктивности с помощью прибора для измерения АЧХ....

Shortwave Resources-Part 2- 0:03:31

Shortwave Resources-Part 2- The antenna splitter

#502 NANOVNA Demystified 0:28:44

#502 NANOVNA Demystified

#931 Adjustable Inductors 0:05:02

#931 Adjustable Inductors on the VNA

Pomiar mocy i 0:30:27

Pomiar mocy i nieudany test anten. #sp8gb #baofeng #quansheng #yaesu #ft-4x #nagoya #nanovna

Testing RF Amplifiers 0:09:32

Testing RF Amplifiers using Sweep Generators

Комментарии
Автор

nice splitters/couplers are always made with transformers to reach low insertion loss and good isolation, however they don't have same low fequency response ...expensive or home made tweaked reach 3.2 insertion loss and more than 16 dB over threeoctave ie 10-1000 MHz, mini circuit is a good manufacturer for these like Anzac ...

johnlegros
Автор

How do I calibrate the NanoVNA to measure power splitters? Should I do it as normally I would do to measure an antenna for example?

marcoarancibia
Автор

Hello IMSAI Guy, I have a Mini Circuits ZFSCJ-2-1, a 500mhz 180 degree splitter -combiner. How would one measure isolation and insertion loss and phase difference between ports on that?

videomejoe
Автор

You go to the NanoVNA but fail to show how you are using it. There is no mention of the key things you need to know in buidling a power divider which you call a splitter. Just jumping to the Nano without showing where you went to in the Nano and why defeats the usefullness of this video.

ramjet
welcome to shbcf.ru