filmov
tv
Ράμπα για ποδήλατα - μηχανάκια σε σκαλοπάτια- How to make a bicycle ramp for stairs
Показать описание
Μπορούμε να χαράξουμε το ξύλο για να μην γλιστράει, πιο καλά είναι
15 Χ 2,5 εκατοστά, και στο μήκος που θέλουμε
σας ευχαριστώ
Every time you want to carry your bicycle upstairs, you have to actually carry it in your back.
With this little contraption you can roll it up the stairs, without having to carry it on your back.
All you'll need is a long piece of wood board, as long as the length of your stairs, and a couple of smaller pieces to make the stops, as I show in the video.
Place the board along the stairs, at the final position you want it to be, and then construct the retainers, so that it won't slip when you put the bicycle on it.
These two retainers are made from pieces of the same wood board, with a length of 20 cm and 10 cm. Place the longer one on the bottom and the shorter one in the back, making a right angle triangle.
These two retainers will keep the whole board in place, and it won't slip when we use it.
The board itself can be carved with the angle grinder, so that it will provide grip for the tires, and also side guards can be placed along the length of the board, to keep the tires in place.
The board to be used can be 15cm wide by 2cm thick.
Additionally, I place lateral supports that act as extra retainers, grabbing on the railing, to stop the board from moving left and right, but this step can be ommited.
Thanks for watching, and if you like what you see, consider subscribing.
15 Χ 2,5 εκατοστά, και στο μήκος που θέλουμε
σας ευχαριστώ
Every time you want to carry your bicycle upstairs, you have to actually carry it in your back.
With this little contraption you can roll it up the stairs, without having to carry it on your back.
All you'll need is a long piece of wood board, as long as the length of your stairs, and a couple of smaller pieces to make the stops, as I show in the video.
Place the board along the stairs, at the final position you want it to be, and then construct the retainers, so that it won't slip when you put the bicycle on it.
These two retainers are made from pieces of the same wood board, with a length of 20 cm and 10 cm. Place the longer one on the bottom and the shorter one in the back, making a right angle triangle.
These two retainers will keep the whole board in place, and it won't slip when we use it.
The board itself can be carved with the angle grinder, so that it will provide grip for the tires, and also side guards can be placed along the length of the board, to keep the tires in place.
The board to be used can be 15cm wide by 2cm thick.
Additionally, I place lateral supports that act as extra retainers, grabbing on the railing, to stop the board from moving left and right, but this step can be ommited.
Thanks for watching, and if you like what you see, consider subscribing.
0:09:03
Ράμπα για ποδήλατα - μηχανάκια σε σκαλοπάτια- How to make a bicycle ramp for stairs...
0:00:08
Ράμπες (downhill)
0:00:51
ΚΛΕΙΔΩΜΕΝΟ ΠΟΔΗΛΑΤΟ ΣΕ ΡΑΜΠΑ ΑμεΑ
0:00:19
Νέο σχέδιο ράμπες Κερατέα
0:00:59
Η ράμπα.μου
0:01:03
Electric bike στις ράμπες Θεσσαλονίκη
0:00:37
Ραμπα στην κοκκινογη
0:02:41
Πως να κάνετε σούζα με το ποδήλατο
0:01:56
πώς να φτιάξετε μία γρήγορη ράμπα για άλματα με 3 υλικά.
0:00:14
Building a beginner friendly mtb ramp with my brother #shorts
0:00:05
Staircase Bike Ramp
0:00:18
ΡΑΜΠΑ ΆΜΕΑ ΣΤΟ ΔΗΜΑΡΧΕΊΟ ΑΛΜΥΡΟΎ
0:00:13
DIY AWESOME BMX Ramp BUILD!! #shorts #bmx #diy
0:02:30
Στήριξη Τσουκαλά για τις ράμπες με τα ποδήλατα
0:04:22
moto ramp with winch FINAL- Ράμπα moto με εργάτη Trailer ιδιοκατασκευή
0:00:36
DIY cheap motorcycle Bike Tilt Lift Table
0:00:19
Πτυσσόμενη ράμπα για ΑμεΑ σε εμπορικό κατάστημα
0:00:07
κάνω ράμπες στο δάσος DimitriHacker
0:07:44
Στης ράμπες!
0:00:25
Χωμάτινα Αλματα στο Local's Bikes με τους πιτσιρίκους Ν & Γ * VIDEO 2...
0:09:26
Πήγαμε στης ράμπες πανοραματος καναμε πολλά κόλπα
0:00:58
Το ποδήλατο μου και μια τρομερή ενημερωση
0:00:59
Ηλεκτρική ράμπα ανύψωσης
0:01:16
Ποδήλατο ράμπα αυτοσχέδια και διάφορα κόλπα
Комментарии