Vevor Digital Ultrasonic Cleaner // Review and Testing

preview_player
Показать описание
LINKS:

Discount Code VVSALE5 for 5% off

SUPPORT:
If you want to support my work - I am very grateful. Here's the link...

#vevor #ultrasoniccleaner #toolreviews
Рекомендации по теме
Комментарии
Автор

FYI Put your parts and cleaning solution in a plastic zip bag. Put the bag in the reservoir. Add water to reservoir to full mark. Never have to clean reservoir. Save the seals from leaks at the spigot.

scottwilson
Автор

I am a jeweller, thanks for your video! I am looking to replace an expensive Elma ultrasonic and other jewellers have recommended Vevor. You can put jewellery with stones but don't allow to vibrate against eachother..hooks work well. Loose stones can be dislodged but then you can take it to a jewelller for repair! At least it didn't fall out at Bondi Beach!
Some stones will get damaged or broken so please research first. Opals, pearls, emeralds, corals, stones with inclusions ( fissures or cracks etc) should not be put in, as well as many other stones .

stevemorrison
Автор

Got a Vevor 6 liter cleaner recently, with electromechanical thermostat and timer. It's a pretty nice machine though it's made of thin and flimsy stainless steel sheet metal; I don't complain though. It appears that those cheap Chinese ultrasonic cleaners pop up here and there under different brands, but they're very similar, so it's certainly the same OEM. Mine had a crappy plastic hose barb and very soft hose, and I modded it with a pump and in-line filter for cleaning fluid recovery.

KeritechElectronics
Автор

These can be used to remove rust, just put your tools/fixings in a plastic zip bag with dilute oxalic or citric acid. In Australia Oxalic acid is sold as Diggers "rust and stain cleaner".

TheSnowLeopard
Автор

These are great for carburetors also I watched another video the guy put 50/50 water and white vinegar or CLR and it removed all the rust on the nuts and bolts he put in.

richardaquino
Автор

Mine lasted 15 months with perhaps 12 uses. Vevor's response - "it is out of warranty, we can offer you a discount on a new one" ...

Tinker
Автор

Try using an acid bath to remove rust in the sonic cleaner. Also; I will be using my VEVOR to sous vide a steak. Guga did this to successfully tenderize steak.

robavor
Автор

Great review. Thanks for taking the time to make this. It helped a lot

popcultureheroes
Автор

Thanks for this review. Vevor says that the tank is 15 cm high, but I assume it's the total height from the bottom of the tank to the lid, and that you cannot pour so much liquid in there or it would overflow and spill over, obvioulsy. So what is the true usable height, i.e from the bottom of the tank up to the Internal groove which is the max level indicator?

fluxcapacitor
Автор

We had one of these in the airforce that was big enough to take a holden 6 cyl engine, we used to fill it with freon, If you ever wondered why Amberley was soo hot, no ozone...😂 T-rocks

t-rocks
Автор

Dont use it on jewelry with stones...the vibrations can dislodge them

r.t.h.-RghtThHan
Автор

Question for anybody who can help me. How long should I heat the ultrasonic cleaner for before I put my jewelry in for cleaning? Please help!!

jacquesleffall
Автор

I wanna put an old cookie sheet in there and see what happens 🤣

jordanmjustice
Автор

16:00 AFAIK you should always fill up the whole thing with water otherwise it will break down quite quickly

wjkfskr
Автор

Is there a way to set up the temperature on these to a certain degree, (let's say 35C), where the machine does "not" pass that particular temp?
I have the same model, the little blue light will go off, but the "actual temperature" keeps on rising.
Thanks a lot for posting this vid

luisamedina
Автор

I guess evapo-rust + this works wonders for heavy rust.

JohnSmith-cwtp
Автор

My machine is heating but when I am trying to push the ON button..it vibrates for 2 - 3 seconds and than turn off.
What should i do?
Thank you in advance

sanawarsi
Автор

Hose might be for gravity siphon if the drain hole gets clogged and you don't want to lift machine to empty it etc.

but Vevor is good enough, I bought a jack hammer and a Jack from them, both great, will probs try use your coupon if it still works lol

NickBowden
Автор

You should try ultrasonic cleaner solution. For rust cleaner

lewisivanaclan
Автор

Is it normal to produce stricking noise? I Just bought the 3l vevor ultrasonic cleaner and it noisy loud sound

lidiasantos
visit shbcf.ru