Installing WFVIEW and wireless CAT/Audio with the IC-705

I like WFVIEW and the wireless capabilities. It does have a minor quirk, but it has been working pretty good and it great with the Icom 705

0:00 Begin
0:36 supported radios
2:39 Configuring the radio
6:00 virtual serial port
7:04 wfview configuration
9:00 setting up your digital program
10:38 checking for audio output and fixing
12:55 switching back to the microphone and using the presets

[KMACK]

One of these days I need to do a deep dive for this on Linux. Good tutorial!

[temporarilyoffline]

Good stuff. I was still able to get the radio to lockup in hotel room, but that's like transmitting inside of a Faraday cage. Lots of reflections!

[dannystephenson]

Great tutorial couldn't of done it without you, works a treat thank you.

[dougbas]

👍👍 followed this video and it works flawlessly! THANK YOU! Helpful? comment. I would have gained by seeing you setup all your preset values and not just WLAN. BTW, I peeked thru your fingers to get most of them. Again, great and helpful video.

[johnbogard]

Great accurate information. Video moves quickly between settings often without a clear explanation of how these setting are structured - often with author thumb in the way. Use the pause feature on Utube to find these places and make the suggested change. Still, a great video. Thank you.

[dougbas]

Thank you. Time to do it myself. You saved me many hours!

[fredburger]

Thanks for the tip on how to get TX audio back if it drops out when clicking on TUNE (wfview disconnect/connect and changing audio input/output sources). I had been having that problem and your method solves it for me.

[timdbl]

Thanks for the video. Can this method be used to run WSJT-X wirelessly?

[evrenulusoy]

Can someone write down all the steps for radio and computer one by one? In every video I watch, I see something that was said incompletely in the previous video, but I still could not establish a connection between the radio and the computer.

[sterlingderrick]

I tripled checked every radio and computer setting shown is this video and still no connection. The radio is connected to the WiFi but the computer will not connect to the radio. What am I missing? Frustrating!! T 8:25 the author says go to "enable control" and then clicks on the "External control" then says set to Com 20 and enable it but no explanation of how to enable it. When the "connect to radio" is pushed in the video, a message appears at the bottom of the screen saying "radio found ...etc). I am not getting that message. Any ideas???

[VEASN]

Is there a means to connect the 705 to the laptop through wifi, and also have your laptop still connected to the internet?

[timdbl]

I did all this and functionality works with WST-X via Wfview over WLAN. But, in TX, the TX audio is pulsating up and down in level, and is a bit noisy. Does anyone have an idea why and how to fix it?

[carmelob]

How can i hear the audio via PC speakers or headphones and trasmit with PC Microphone?

[andreclay]

New version has fixed the audio issue.

[ericbudinger]

I must be doing something wrong. I cant get it to connect at all. N2KOJ

[Romad]

Can you just give a step-by-step list?

[BikingHikingRadio]

Tom - Thank you for the video this morning. I followed the instructions and still came up empty. I sent you an email to your address on QRZ. If you get a chance can you look it over to see what I might be doing wrong? I'm on a mission to get this working so I can eliminate computer noise once and for all out in the field doing POTA/SOTA. 73 Scott.

[KingsleyHulda]

Hernandez Amy Clark Brenda Thompson Jason