LG Revolution VS910 Screen Replacement Repair Guide

Repair a damaged screen or other internal component on your LG Revolution VS910 using this detailed take apart repair guide. The screen replacement repair guide will walk you through all the steps required to safely and quickly disassemble your LG smartphone.

[pablo]

Ok just finished replacing the digitizer got it on ebay along with the LCD for 10 bucks haha, everything turned out great i wanted to personally thank you alot!

Though i did scratch the side of the housing in one of the corners to remove the old digitizer its not noticable, thanks again!!

[atlasentity]

Thank you for this video, helped me successfully change the digitizer on my gf's Revolution

[Repairsuniverseusa]

You should then only need the Touch Screen Digitizer. As long as there is no physical damage to your LCD that should be all you need. We currently have them for $29.99. If you click the link in the description you will be taken to the correct page to find it. We also ship from the US so it would arrive fast.

[Repairsuniverseusa]

You can use this video as a reference but internal components different. Screen replacement are very similar.

[drakejohnson]

Hey doing this repair and was curious about the flex on the bottom of the old part. Do you transfer it over to the new part? If so whats the easiest way to do that.

[DominicGray]

I just had to get it replaced by Verizon they did it freely. Phone now works. Thanks for your help!

[NOLAverse]

Hello sir. I am about to buy a new digitizer for my LG revolution. I just wanted to ask your advice about the purchase. I know the lcd screen works because I can see the missed calls and missed alerts stacking up in my phone's log. The only problem is the touch screen that I am aware of, which does not respond to my touch at all. Will simply switching out the digitizer solve my problems?

[Repairsuniverseusa]

Gently slide it around the outside edges, re;easing the clips which is holding the back housing in place.

[Repairsuniverseusa]

I am sure you are correct it sounds like a tab for the keypad.

[seankennedy]

Thank YOU! Saved me from a $150 repair bill

[MsKurlySue]

Just a question. How did you get the safe pry tool started? I feel like I can do the rest but I can't get it.

[MegaTimechange]

My phone is an lg smart phone but its basic key board on front and slide key board I'm wondering if the same rules in the video apply for my phone as well

[Repairsuniverseusa]

Glad we could help. All parts, tools, guides and even support can be found on our website at RepairsUniverse (dot) com

[pablo]

Do you need to buy adhesive to re install the digitizer?

[georgemorales]

Hello. Im in a different situation... Can you help me get the sim card for my LG ms918? Where can i get one from ... If you can help me that be the most help.. Thanks, GG

[MsKurlySue]

I get that... but where do I put it between the inner and outer housing? I'm confused and I can't tell where it went in on the video

[Repairsuniverseusa]

The Lucid and the Viper by LG are the same device. We have the guide available on our site. Please chat with us LIVE for more info. RepairsUniverse (dot) com

[Repairsuniverseusa]

We suggest using new adhesive for a stronger seal. You can find adhesive for this device on our website.
RepairsUniverse (dot) com

[DominicGray]

Now my phone says no service? Is there a reset that is needed for the SIM card as it is no longer being recognized?

[Repairsuniverseusa]

Try to place your SIM card into another device and see if it recognizes.