How To Use ATEM Mini Pro Hardware Encoder for YouTube | Step by Step Tutorial

Tutorial from George Mihaly on how to use the ATEM Mini Pro built-in hardware encoder to live stream to YouTube Live or any RTMP Live streaming platform like Facebook Live, Twitch, or Vimeo.

👍Thanks for watching! Please like, comment, & subscribe.👍


=============================
Table of Contents:
=============================
0:00 - Introduction
0:17 - About George Mihaly
1:05 - Tutorial Incompatibility With Atem Mini
1:33 - STEP 2: Update ATEM Mini Pro Firmware over USB Type-C cable
2:13 - STEP 3: Assign “DHCP” to ATEM Mini Pro in ATEM Setup
2:30 - STEP 4: Copy Stream Key from YouTube Live Control Room
2:44 - STEP 5: Disable “Auto-Start” in YouTube Live Control Room
2:53 - STEP 6: Paste Stream Key into ATEM Software Control
3:02 - STEP 7: Configure Camera Settings in ATEM Software Control
3:24 - STEP 8: Configure Audio Settings in ATEM Software Control
4:32 - STEP 9: Test Internet Speed on Computer over ethernet
5:42 - STEP 10: Connect ATEM Mini Pro to internet over ethernet
5:52 - STEP 11: Set Livestream Bitrate in ATEM Software Control
6:32 - STEP 12: Press “On Air” in ATEM Software Control or ATEM Mini Pro
7:03 - STEP 13: Verify Signal in YouTube Studio Live Control Room
7:30 - STEP 14: Click “Go Live” in Verify Signal in YouTube Studio Live Control Room
7:40 - STEP 15: Thank you for watching! Like, Comment, & Subscribe 🙏

=============================
Follow Me:
=============================

=============================
#AtemMiniPro #livestreaming #multicam

(DISCLAIMER-I am a participant in the Amazon Services LLC Associates Program and links for products I use and recommend are affiliate links. Thank you for your support -George)

[GeorgeMihaly]

👇🏼TIMESTAMPS 👇🏼 Thank you for watching! -George
0:00 - Introduction
0:17 - About George Mihaly
1:05 - Tutorial Incompatibility With Atem Mini
1:14 - STEP 1: Update to latest ATEM Software from Blackmagicdesign.com
1:33 - STEP 2: Update ATEM Mini Pro Firmware over USB Type-C cable
2:13 - STEP 3: Assign “DHCP” to ATEM Mini Pro in ATEM Setup
2:30 - STEP 4: Copy Stream Key from YouTube Live Control Room
2:44 - STEP 5: Disable “Auto-Start” in YouTube Live Control Room
2:53 - STEP 6: Paste Stream Key into ATEM Software Control
3:02 - STEP 7: Configure Camera Settings in ATEM Software Control
3:24 - STEP 8: Configure Audio Settings in ATEM Software Control
4:32 - STEP 9: Test Internet Speed on Computer over ethernet
5:42 - STEP 10: Connect ATEM Mini Pro to internet over ethernet
5:52 - STEP 11: Set Livestream Bitrate in ATEM Software Control
6:32 - STEP 12: Press “On Air” in ATEM Software Control or ATEM Mini Pro
7:03 - STEP 13: Verify Signal in YouTube Studio Live Control Room
7:30 - STEP 14: Click “Go Live” in Verify Signal in YouTube Studio Live Control Room
7:40 - STEP 15: Thank you for watching! Like, Comment, & Subscribe 🙏

[dijeysr]

Thank you so much for doing this. It's a great help for us to have have you run the setup step by step. God bless.

[MartinVanDerSande]

Thank you for this video! Great presentation

[DreamPrashant]

George, thanks so much for all your help with live streaming bud. So glad you’re sharing your knowledge & good vibes through these videos. !!

[TinenTech]

Thank you, that was helpful. Is there any hookup that will allow ATEM Software Control software to work, while still acting as a hardware encoder for YouTube and using the ATEM's USB port to record to a hard drive? e.g. both the Mac and the ATEM connected to an Ethernet switch?

FYI, now in August 2022, it seems the "Enable Auto-Start" button on YouTube's streaming page has been removed.

[drchristianheim]

This is very helpful. Thank you for talking it through so simply and including all the steps from the start as there are few other vids that do this

[JulianPrior]

Really helpful video, thanks George. I have an Atem Mini Pro ISO and was wondering how to setup YouTube lives-streaming over ethernet and this is perfect, thanks!

[andrewhenry]

Excellent video... I really appreciate how well you delivered the information!!

[lsc]

So much good information! 👏👏👏 AND you can juggle!!! More content, please!

[dugsbugs]

I wish they would just have a custom rtmp preset without having to edit the XML file.
The gopro and DJI apps both have that ability as well as OBS.
They seem to be adding new platforms all the time but no custom .

[TONYCOOLSFISHINGXTOURING]

Thanks mate I had one setting wrong (IP setting) & you saved the day spent hours trying to fix CHEERS.

[akmediaproductions]

Please elaborate or give an example on how did you arrive at the required internet speed @0:56

[BodyEliteSystems]

George, wow!! This is an excellent video, very well done. I watched close to a dozen videos finding myself having more questions than answers, yours however....perfect! Thank you for putting this out! Qt. The USB C cable. Do I need data or HDMI to attach to my computer? I have a Microsoft HP Omen. Thanks in advance, Jeremy

[BerlinDsouza]

Hey Bro It was very Helpful.. I would Like to go ahead and see more of ur videos

[CardstonAlbertaWestStake]

When we use your exact setup to stream to Youtube we always get the following warning:
Please check the video resolution. The current resolution is (1920x1080), which is not optimal.
Is this something we should worry about. I noticed that you did not receive this warning with the Video Standard set to 1080p29.97 just as we have it set. Anyway to get rid of that warning? Thanks.

[andrewhenry]

How do I set the stream resolution to 720p30

[charrro]

Is there a way to do this and at the same time use the ATEM mini pro on a Zoom meeting?

[TonyBabarino]

Problem with this tutorial: My YouTube Studio does not look like yours. There is NO "Enable Auto-Start" option in Additional Settings. Further, I can not get to this page directly following your process. Did YouTube make changes to the it's Admin area? YouTube forces me to "Start" from a start button in a lower area (pop up box?) that also have stream key....but the layout does not look like this. Can you update us with a July 2021 video please? I need some assistance. Thank you! PS: My video look backwards during a recording but on play-back looks "normal".

[FreakyandFaith]

test recording using QT? how does that work?

[calvarychapelleander]

Question: I have an Atem Mini Pro. I am having an issue where I can't seem to get rid of whats on my camera's LCD screen when it goes through the ATem. Is there a setting I'm missing to get rid of what's on my Sony's LCD screen in the ATEM? I try to do it on my Sony Camera but I can't get rid of everything STB will always remain or battery. Now a capture card works to completely get rid of everything but I was hoping not to have get 3 or 4 capture cards to work the Atem. Is there a setting I'm missing on the Atem that will fix this? Thanks in Advance!