F1 Brake Light On Your Car! - How To Install a F1 Brake Light for Under $10! | Cheap and Easy

See how to install a F1 Brake Light for under $10! In this video we show you how we installed a cheap but awesome F1 Brake Light / Rear Fog Light on the Junkyard Miata Build. It's a simple install so watch the full video to see how it looks and performs!

Parts list:

*The merchant links provided can be affiliate links and the channel earns a small commission from qualifying purchases at no extra cost to you. These include but are not limited to the eBay Partner Network and the Amazon Associates Program. Thank you for your support!

Make sure to Subscribe to come along for the journey as we learn and build some amazing project cars!
---
Support the channel by:
2. Clicking the affiliate links in the video description before purchasing
3. Watching a video all the way through, liking and commenting
4. Subscribing!
---
Follow us on:

**All modifications and work performed on your vehicle are at your own discretion and risk

#mazdamiata #miata #miatabuild #mx5 #projectcar

[eldrickejleest]

I have the reverse version (white light) of this.
It also comes with 3 black wires with symbols on them.
If you hold these 3 black wires facing you, the one on the left (with dots) is the ground wire. The one one the right (with dash) is the running light wire (in my case the reverse wire). The one in the middle (also dots), are the sequencial wire (the led flashes).

[danbruh]

Is there a rubber grommet that goes into that trunk drain hole? I imagine the wire will vibrate against that metal and cause a

[troydwyer]

What's wire diagram off red light left, middle, and right? Mine are all black no markings.

[troydwyer]

My light has x x x on far left wire would this still be ground? Dash line in middle. Right might be line also or no markings

[Xlevy]

When you're on the brake does it continuously flash?

[eldrickejleest]

The light came with 3 wires. All with symbols on them. Which one is the ground?