filmov
tv
Series 100 Cast Iron Circulator Pump from Bell & Gossett
Показать описание
This pump is designed for use in domestic and light commercial closed-loop water circulating systems. The Series 100′s three-piece design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced.
The Bell & Gossett Series 100 NFI runs on 115v, generating 1/12 HP and 1725 RPM. It has a maximum pressure of 125 PSI, a maximum flow range of 33 GPM, and a maximum head range of 8 feet along its pump curve.
The oil-lubricated motor is specifically designed for the Series 100, and resilient mounting provides quiet, dependable service with minimum annual lubrication. The motor, paired with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings, or piping.
This single-phase pump has flanged connections. Flanges must be purchased separately and sized to match system piping sizes of ¾”, 1”, 1-1/4” or 1-1/2”. The pump comes with gaskets, bolts, and oil. It has a maximum operating temperature of 225 degrees F, and measures 6-3/8” flange-to-flange.
----------------------------------------------------------------------------------------------------------------------------------------------
Email us:
The Bell & Gossett Series 100 NFI runs on 115v, generating 1/12 HP and 1725 RPM. It has a maximum pressure of 125 PSI, a maximum flow range of 33 GPM, and a maximum head range of 8 feet along its pump curve.
The oil-lubricated motor is specifically designed for the Series 100, and resilient mounting provides quiet, dependable service with minimum annual lubrication. The motor, paired with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings, or piping.
This single-phase pump has flanged connections. Flanges must be purchased separately and sized to match system piping sizes of ¾”, 1”, 1-1/4” or 1-1/2”. The pump comes with gaskets, bolts, and oil. It has a maximum operating temperature of 225 degrees F, and measures 6-3/8” flange-to-flange.
----------------------------------------------------------------------------------------------------------------------------------------------
Email us:
0:01:24
Series 100 Cast Iron Circulator Pump from Bell & Gossett
0:00:24
B&G Series 100 Circulator Pump Bench Test
0:10:49
How to Repair a Bell & Gossett Series 100 Circulator Pump (remastered)
0:02:35
Bell & Gossett Circulating Pump Series 100 Model 100 NFI 1/12 hp 115 Volts replacement
0:00:09
Bell & Gossett Circulating Pump Series 100 Model 100 NFI 1/12 hp 115 Volts replacement
0:00:32
Crazy! Bell & Gossett Circulator Pump
0:10:42
How to Repair a Bell & Gossett Series 100
0:07:14
BELL GOSSETT SERIES 100 SEAL KIT AND BEARING ASSEMBLY
0:17:58
NO HEAT!! SERVICED 2 PUMPS. REPLACED FLANGES, IMPELLERS, GASKETS, PIPES.
0:01:21
Bell & Gossett Series 100 Pump Whistling
0:46:14
ANOTHER BAD B&G 100 SERIES 3 PIECE CIRCULATOR BEING REPLACED WITH TACOS NEW 007E
0:01:00
Shattered B&G Circulator Pump Coupling
0:00:22
B&G 100 series circulator pump...warn motor mounts?
0:08:21
Troubleshoot the Bell and Gossett boiler circ pump
0:00:38
Did I Over Oil the Bell & Gossett Circulator?
0:03:26
Bell & Gossett Series 100 Bearing replacement
0:05:06
Jim on Bell and Gossett series 100
0:05:32
How to Change the Bearing Assembly on a Bell & Gossett Circulator Pump
0:01:52
Bell & Gossett 1BL012 Booster Pump Product Highlight
0:08:56
B&G 100 series pump coupling replacement (REAL TIME)
0:10:39
Boiler pump change out B&G 100 series to taco 007
0:00:15
3-Zone Camus Hydronics Boilers with Bell & Gossett Pumps
0:00:56
B&G Circulator Pump Replaced by an Apprentice
0:06:24
Let's teardowm the B&G Circulator pump
Комментарии