Product Introduction: Flexible RGB LED Matrix 8x32

This is a high-quality 8x32 pixel LED matrix panel made by WS2812B LED, it uses 0.23mm enhanced flexible PCB to enhance heat-sinking capability. On the back side, there is one group of wires for signal in, one group of wire with the connector for signal out, that means you can connect more than one LED matrix panel if you need bigger LED screen. Also, there is a special power wire for extra power supply to provide high current power, which is very convenient.

WS2812B is a 5050 RBG LED with integrated driver chip. By the integrated driver chip, it can achieve 1024 points of cascading (refresh rate at 30fps), and every pixel is individually addressable. Every pixel of 256 brightness display and 16777216 color variance. Only 4 pins of the WS2812B, the integrated driver circuit and LEDs share the same 5V power and 2 pins for signal transmission. Because of the ingenious design, the circuit design for this LED become very simple.

Specification:
- Operation voltage: DC 5V
- LED number: 256
- LED pitch: 10mm
- Waterproof: NO
- Dimension: 8 x 32 cm
- FPCB color: black

Packing List:
1. WS2812B LED 8x32 matrix panel x1
2. LED controller (not programmable) x1
3. RF controller x1

[platordn]

Nice, just found the led strips before i met u. Thx for the awsome video. Gave some great perspective in possibilities.

[omegahaxors-]

This is a good series, you guys have earned yourself a sub. Can't wait to see what other cool tech you've got to show off.

[TheRealKuif]

Hi Guys, cool video! I was at your office in Shenzhen not too long ago. Very nice to meet some of you in person. You're making good progress with cool products. Keep it up! Say hi to Mindy for me, haha.

[AleKasti]

Great product! How many of these can you chain together?

[LearnElectronicsCanada]

Nice product, video was a little choppy and out of sync - need to work on the video quality, but thank you for a clear (westerner style host) easy to understand and loved the "$59... Let's call it sixty bucks".

[rhondasauro]

I was wondering if you can make the same design but make the base for the leds translucent so you can see through it...💥

[pierrekeou]

Hello, Noah, congratulations on your work.
I would like to chain two 8x32 Matrix WS2812B to do like you. I know how to code a matrix, but I don’t know how to code when there are two. Can you provide me with the code you used?
I’d be very grateful.
Thank you.

[martinabreu]

VERY GOOD PROJECT, IT CAN BE PROGRAMMED WITH ARDUINO MEGA 2560 ATMEGA.

[eddieyan]

Greetings, great short video. I was wondering if you how you achieved the text scrolling (code). thank you very much.

[deejayhamm]

Can you show the other pre programmed patterns? do you have anywhere on your website that shows?

[foox-art]

Could you make anything smaller? Like 8x8 perhaps? I need something like this for a project, and it has to be somewhat transparent and see through.

[A_Man_Named_Ghoul]

Can I plug a wireless battery pack to this out of the box and just run basic colours on it?

[martinabreu]

In the code which pin did you use:#define pin 0

[abrahambruiz]

Hi, great product!! Can the pre-programmed controller for patterns be changed for other patterns? How do I get to pick my own patterns?

[marquysejackson]

do you guys have any transparent led film? I want to make a tv head with a full led array with visibility from behind the leds

[mikeandkinhage]

When I connect a third panel it won’t power on why is that?

[thomasdg]

Is it also possible to put them underneath each other?

[cpyimitatin]

Can this be powered with a battery pack?

[tombennett]

are you able to programme various patterns onto the LED array and then change between them using the remote?

[yuliasnanto]

I have 2 pieces of these flexible matrix (size is 8x32). How can I connect these 2 pieces together to make it 16x32 ?