Ss brewtech Homebrew Brewhouse Tour - homebrewing equipment

This is my all-electric Ss brewtech homebrewing system. It's a full 3-vessel rig complete with a hot-liquor tank (HLT), mash tun, and boil kettle. Please subscribe!

FOLLOW ME ON SOCIAL

#ryanmichaelcarter #ssbrewtech #homebrewingequipment #craftbeer #homebrew #garagebrewery

All Rights Reserved ©, Casita Made

[williamg]

Great setup, I just bought a similar Ss kit and I'd love to see a video of how you clean your system! 🍻

[scottbatty]

Very clean looking setup, looking at doing something similar with a gas/electric 30 gal system

[cristianroj]

🔥🔥🔥saludos desde Venezuela 🍺 muy buenos tus vídeos

[osmarochacon-mfrg]

hey Ryan Amazing brewhouse. Do you have a full list of the pieces and parts of your configuration? I want to buy the ss brewtech 10-gallon kit, I see some parts in your configuration but not all that is sold in the 10 gall kit is included in your configuration. I appreciate any recommendations or feedback 🙏🏾 thanks.

[Huy]

You should do a cleaning video on your system, unless you already have.

[jonserluco]

Great video and breakdown. One question - what's that TC fitting between the T of the first pump and the HLT hose, specifically the bulbus SS looking piece just before the T.

[tomlopez]

Great videos. Nice job on the video quality and editing. I second a comment below requesting a dedicated video on cleaning your system. Also how do you like the Brew Cubes? Cheers!

[skpb]

Great setup. For the PID do you have it set on auto tune or self tune? I am having some trouble with getting to temp and holding temp in the mash ton (RIMS) for my strike water. How long does it normally take for you to get to strike temp in your mash ton while circulating through RIMS?

[ClayMahaffey]

Thanks Ryan. I've had my SS Brewtech 3v eRims system for almost a year now, and I'm just getting to setting it up (real life gets in the way of fun sometimes!)

So do I understand it right that you send your MT recirc through the primary pump, then over to the inlet of the HLT pump to feed the RIMs and back into the MT? I'm guessing that's so you don't have to do a hose switch to start lautering. Do you run both pumps when mashing? Or do you just push through the HLT pump?

Thanks so much for the videos! They've gotten me fired up to get my 3V system working (I have a BrewHa 1/2 BBL system as well, so it was easy to just put off getting my smaller system up and running.)

[frey]

My setup is almost finished…if you don’t mind my asking, what is the sight glass connecting into before the bottom left pump? I see the micro tee but what is the tee connected too? Wondering if one of the valves that came with the tree would work 🤔🤔🤔

[raffaeledipalmo]

Sorry for my bad english,
I would have liked to see the side linked to the heating of the mashing and boiling vat, in my system to avoid having the resistance blocking the filter plate I added a side resistance, further away see how you have arranged your heating system?

[shnapp]

Hey Ryan, great video. I purchased the filter grant since it looked like a nice gadget to add. It looks like you’re going from your pump through filter, into chiller then out to fermenter. It seems like you will be left with the filter grant full of wort as once the pump gets through all the liquid there is nothing to force the remaining wort out of the grant and theough the chiller to the fermenter. Can you confirm this or let me know how your getting all the wort?

[marchitchcock]

I can't remember if this was addressed in any other vid, but what brewing software are you using???....Brewfather seems to make it annoying for anyone with 3-vessel systems....

[malaktose]

So mash recirculation goes through 2 pumps?

[albertoramirez]

Ryan, amazing videos! I have been looking at the same set up and I wonder if I should go with the 5 gal or 10 gal Kit. I am guessing from the videos yours is the 10 gal with the 20 Gal vessels and 14 gal Unitank. Did you have the Glycol Chiller from the beginning? Cheers!

[ericeves]

What size mesh are you using on the filter that is inline before your plate chiller?

[jimdeasy]

Did you buy the SS brew tech 10 gal rims kit, or buy all the parts individually

[marchitchcock]

Another question for you have all components connected. I have a similar T to the first pump to utilize the HLT and the sight glass recirc. My question is, how do you ensure that HLT water gets into and out of the first pump with your set-up??....It appears that your first T has not valves...I do see a valve at the pump "out" which would need to be open. But it seems like pumping your HLT would shoot right up into your sight glass which comes to the same I am supremely missing something...lol

[santinius]

Amazing setup!
Did you compose it or it's a complete kit?
Cheers🍻

[carlosyurivilca]

Great video Ryan! What type of connectors are you using for your plate Chiller? I can see two types