filmov
tv
Mechanics of Materials Problem: 1-57
Показать описание
Question: The specimen failed in a tension test at an angle of 52° when the
axial load was 19.80 kip. If the diameter of the specimen is 0.5 in.,
determine the average normal and average shear stress acting on
the area of the inclined failure plane. Also, what is the average
normal stress acting on the cross-section when failure occurs?
Chapter 1 Problem 1-57
Please Like, Subscribe, and comment on other problems you would like to see.
axial load was 19.80 kip. If the diameter of the specimen is 0.5 in.,
determine the average normal and average shear stress acting on
the area of the inclined failure plane. Also, what is the average
normal stress acting on the cross-section when failure occurs?
Chapter 1 Problem 1-57
Please Like, Subscribe, and comment on other problems you would like to see.
0:08:06
Mechanics of Materials Problem: 1-57
0:03:07
Problem 1-57/1-58/1-59/ Engineering Mechanics Materials
0:03:41
Mechanics of Materials Problem: 1-3
0:11:21
Mechanics of Materials: Lesson 57 - Strain Gauges and Rosettes Explained
0:04:00
Problem 1-5 Resultant internal loadings at point B, Mechanics of Materials
0:17:18
Statics: Lesson 57 - Introduction to Internal Forces, M N V
0:14:57
Mechanics of Materials: Lesson 2 - Normal Stress, Review of Units
0:08:27
Problem 1-3 Internal Loadings on section b-b through centroid C, Mechanics of Materials
2:07:29
MECHANICS OF MATERIALS 2024 JANUARY LONG QUESTION ANSWER SOLUTION LAST PART | WBSCTE | 3RD SEM
0:18:24
Mechanics of Materials: Lesson 1 - Intro to Solids, Statics Review Example Problem
0:00:41
Problem 1-21/ Engineering Mechanics.
0:01:10
Problem 1-22/ Engineering Mechanics Materials.
0:02:05
Problem 1-44/ Engineering Mechanics Materials.
0:09:10
Strain Deformation Equations (Example 1) - Mechanics of Materials
0:01:20
Problem 1-45/ Engineering Mechanics Materials.
0:03:22
Problem 1-51/1-52/1-53/ Engineering Mechanics Materials.
0:03:09
Problem 1-54/1-55/1-56/ Engineering Mechanics Materials.
0:00:49
Problem 1-1 / Engineering Mechanics Materials.
0:13:51
Stresses on Inclined Planes (Example 1) - Mechanics of Materials
0:05:23
Problem 1-4 Resultant Internal loadings at C, Mechanics of Materials
0:14:15
Mechanics of Materials: Lesson 4 - Shear Stress, Single and Double Shear Example
0:10:26
Mechanics of Materials: Lesson 3 - Normal Stress with Distributed Load
0:13:12
Mechanics of Materials - Part 57 (Secant formula - Columns) | BME301
0:14:10
Problem 1-6 & 1-7 Resultant internal loadings at point D, E, and F, Mechanics of Materials
Комментарии