Drill and Tap Bit #shorts

preview_player
Показать описание

  1. Kruger Construction
Рекомендации по теме
Drill and Tap 0:00:21

Drill and Tap Bit #shorts

Drill Tap Bits 0:00:09

Drill Tap Bits 2021- Automatically Thread Every Hole You Drill!

Drill Tap Bits 0:00:27

Drill Tap Bits 3/8 Steel #shorts

Thread Tap Drill 0:00:12

Thread Tap Drill Bits Review 2021- Does it Work？

How To Use 0:01:01

How To Use A Drill Tap 👈🏽 #shorts #short

Drill Bits #shorts 0:00:31

Drill Bits #shorts

Drill Bits Hex 0:00:39

Drill Bits Hex Shank Titanium Coated Drilling Tap Bits Thread M3-M10 ||#youtubeshorts #viral #shorts

Drill Tap Bit, 0:00:27

Drill Tap Bit, Compact Stable HSS Screw Tap Reliable for General Purpose ||#viral #short #shorts

Install LINEAR GUIDES 0:10:39

Install LINEAR GUIDES Like a Pro in 2024: Your Ultimate How-To! || (PART 3)

Secret for Drill 0:00:24

Secret for Drill Bits revealed #shorts

These Bits Will 0:00:09

These Bits Will Automatically Thread Every Hole You Drill!

The Best Drill 0:00:16

The Best Drill Bit #shorts

Screw tapping drill 0:00:30

Screw tapping drill bits

6pcs Tap Drill 0:00:31

6pcs Tap Drill Sets Titanium Plated Hex Shank HSS Screw Thread Metric Tap ||#youtubeshorts #shorts

Drill & Tap 0:01:01

Drill & Tap Combo bits with all versions

Titanium Plated Hex 0:00:24

Titanium Plated Hex Shank Tapping Drill Bit #shorts

What size hole 0:00:33

What size hole do I need to drill for a bolt. Drill bit gauge. # shorts

Unique Tap Drill 0:00:19

Unique Tap Drill Bits Shank Titanium Coated HSS Drilling Tap Bits.

Hex Shank Titanium 0:00:23

Hex Shank Titanium Plated HSS Screw Thread Metric Tap Drill Bits Hand Tools Set

Tapping drill bit 0:00:16

Tapping drill bit

Tap drill Size 0:00:27

Tap drill Size formula | Tap drill Size calculation #tapping #tapdrillsize #shorts #shortvideo

Tapping drill test 0:00:20

Tapping drill test

You will never 0:00:38

You will never need to buy a drill bit EVER AGAIN ! #shorts #tips 🤯🙉

Homemade Drill Bit 0:00:26

Homemade Drill Bit 🤔 #shorts #tips

Комментарии
Автор

Don't think I've ever seen a real tradesman.... Hell even a DIY'er have plier protection sleeve! 😂🤣🤣

nocomment
Автор

One thing I was taught many years ago. Never be in a hurry when tapping holes. Oil helps too. 🇺🇸👍🏼

blacksheeple
Автор

Я еще в 80х годах 20века таким комбинированым инструментом работал. Причём, завод, сам для себя его и производил. Все похерили, теперь рады китайским "новаторам"

АлександрТроян-бб
Автор

The fact you go all out full speed with an tap bit tells me exactly how many times you’ve done this 😂🤦‍♂️

peterjenkins
Автор

I used this yesterday in an impact drill driver and to my surprise it worked great on all 4 I did.

dcounce
Автор

I usually get 2-5 uses out of them before they snap clean off and have me trying to extract it for 20 minutes.. it’s worth while to use a regular tap

fatjaysgarage
Автор

Lots of negative comments on this one, I just want to say thanks because I've never seen this before and I think it's a pretty cool tool!

mikeygurule
Автор

😮 got to get me one of these joints now I got to get one. That's amazing! Too bad I'm broke😊

Joseph-ibhr
Автор

I use these all the time as a electrician. Yes they break

tonymontana
Автор

I've tried those drill/tap bits. They break 30% of the time, all the time

MrJoeeano
Автор

Impact blasting with a tap is wild lol low on drill or T handle

ebct
Автор

Note the baby smooth hands and tough guy tattoos

notmikepatton
Автор

The greenlee version is rated for stainless steel. It’s the best on the market.

Burntsparky
Автор

Right at the point he starts driving the Anyone else hearing the theme to Knight Rider kicking off?

oldmanhads
Автор

So what's up with the indentions on the screw? Per cuts?

ogtfromthestep
Автор

Always use those tap bits with a drill and o. The lowest clutch setting on start

lipevolcom
Автор

You can tell how good he is because his tools are so clean

TradingFeline
Автор

What a cutter screw you use in a movie ??

gdesign
Автор

try putting 5he screw in first cut what you want then back off to realign threads

chrislcaggie
Автор

Would never use that in a impact personally 😅 but good work

howardjang