Installing the Noico / Killmat into the 110 Part 1 Roof

Your support is appreciated!
If you have a Defender/Tdi problem and do not know how to fix it, drop me a line!
Maybe I can help!?

Send me a postcard for my wall!

Britannica Restorations Ltd
9 Ch. Rawson
Sherbrooke
Quebec
J1M2A3
Canada

[chrismitchell]

I’ve begun using this in areas where I have steel against aluminum. Specifically, I ordered the repair sections for the seatbelt and tubular outrigger mounts on the front of the tub from YRM Part #175. The repair panels are galvanized steel and they bolt directly to the aluminum tub and seat box which is why they corroded in the first place. It’s like a big rubber gasket!the butyl side is against the steel and the aluminum side is against the aluminum.

[DefenderSLO]

What a difrence a day makes o sound profing. Cbeers King Mike 🥃

[olewurtz]

Great stuff. I used a similar product on the floors of my E-type. Air pockets can be punctured to get the air out with the roller.

[vincentpoole]

Mike. Oh my god, next you'll be installing thick shag pile carpet through this Def' ? Brings back memories of 1970's luxury, with leather & "Burr Walnut" cappings ! V.

[gazzafloss]

So quiet Mike, it'll be like a Rolls Royce to travel in now, well maybe that's a bit of a stretch, but will be quieter by a long way. Peaceful travel only interrupted by the clatter of a 300Tdi engine, well done you...

[danloosmore]

Sticky back plastic, you could get a job as a presenter on Blue Peter, I was waiting for 'hears one I prepared earlier'. Nice job.

[nicholasviney]

One of those jobs where you just start getting the hang of it when you put the last piece up lol

[lenhornsey]

Mike
You should have been a functional specialist for Land-rover.
You should have made a fortune

[patrickjobling]

Ya reckon this stuff would be alright furr under the bonnet squadron leader..😁

[nigeltaylor]

Mike, Hello from Northern Ireland.Can you tell me if you installed material right to bottom of the gutter or did you leave it an inch or two above bottom of gutter.Thanks in advance

[ScottMarriott]

Hi Mike could you give us a rough idea how much we need to cover the roof, sides, floors and doors an idea on cost?

[peterjohnson]

I used the silentcoat stuff here in the UK, 2mm butyl rubber (I think on that point they are all the same it's the other layers that make a difference) smaller pieces made it easier and the fact the roof was off the 110. Worst part was i had the sun blazing down on the reflective aluminium!

[tristanhagerty]

Looks great Mike. I bought a roll of cheap Chinese soundproofing and it work a treat. I think it’s as good as the branded one. I’ve just finished my rebuild of the 2.25 defender engine, how’s yours getting on?

[lockoutbikes]

Mike any idea how thick the glass is on 300tdi alpine window? Need new seals but not sure if 4 or 5 mm seal.
Cheers carl.

[philaddison]

what did you use to clean before applying the mat? Brake cleaner?

[hyhgtsssassfilj]

Was there not enough wire to put the killmat underneath the wiring? Hope you never need to trace a wiring break under that lot. 😁

[secpacchichi]

this seems like a job for Curtis - LOL

[graham-martin]

can you buy direct from the suppliers of killmat mike ? do they have a site

[danloosmore]

The world is going metric, inch by inch.

[thejamesieboy]

Hi Mike, I bought Kilmat after seeing parts of an earlier video with a 90. To do the roof, sides etc if my '84 Series3 88, but some one said the Series roofs don't make as much noise. Can you confirm or deny it for me please?