LESSONS LEARNED - Network Cable Pulling Tips & Tricks

preview_player
Показать описание
Hey everyone,

As a career educator, I wanted to take the time to pass on information in regard to pulling network cable. This is not my full time gig, but I took on a project that I felt pretty comfortable with! Please let me know what you think, especially if you are pulling network cable for the first time.

Links:

Thank You for watching this! Please subscribe and get the latest updates as well as following me on:

Рекомендации по теме
Комментарии
Автор

Zip ties are ok but theyre for places where the wiring wont chhange like the ceiling, but dont zip them too tight or they can dig into the cables jacket over time. Velcro is for your switch closets and server rooms where cables are gonna be swapped around over time.

Henry_Jones
Автор

Pull String is a definite helper. And it's pretty inexpensive for a bucket.

tazklk
Автор

salute to you sir, im working alone as cctv tech and yeah two heads is better than one. hope i get some help from you when i install new cameras.

nazjoe
Автор

My boss used this video to test me 😂😂😂😂 sweet work

Kylo_Bandz
Автор

For anyone reading this, a few things that help tremoundously, getting a Push Poll its a 25 foot collapsable pull with a hook at the back end, tie your cable through the hook and extend (possibly yeet) your push poll forward, if you dont have one then you can use fish sticks or fish tape to get some extra distance in a ceiling. Also PLEASE FOR THE LOVE OF GOD USE PULL STRING!!!! If you arent using it for yourself atleast leave some behind for the next person coming through. If you dont have pull string dont do the pull unless you get some.

phaydedwolf
Автор

There are wire-pulling machines that can pull large bundles of wire and have a clutch that prevents exceeding the pulling force of the specs of the cable. They make life much easier in many cases, but the machine itself is quite expensive so you must have a certain amount of work to justify the cost.

PWingert
Автор

Never remove existing witing unless its part of the scope of work and the customer is aware of the extra cost. Its so easy to remove something live thats still needed by mistake.

Henry_Jones
Автор

Zip ties vs Velcro. If I am placing cable that is not likely to be changed, moved, or removed, I will use Zip ties that have releases on them so they can be changed and re-used or salvaged for future use. Velcro is equivalent but can take up more space at the wrap point since you cannot cinch them as tight. To estimate the length of cable run look at a set of plans for the building and make install measurements from these plans. If you are lucky enough to have digital access to plans create a cabling layer for each type of cabling. right in the AutoCAD file and place your cable runs on that layer. There are also tools that can analyze these runs and provide recommendations for time, labor and materials. This may incur an additional cost for having an expert do this work in AutoCAD for you, but it benefits you and the employer for future moves, adds and changes. If the plans already have cabling layers on them then they can be used to estimate new cable runs and TM&L for replacement. Many RFQ's will specify that this work is part of the project, so you need to have a specialist available to perform the required AutoCAD work. Some RFQ also specify strict qualification requirements for final testing and documentation of those tests. I once was part of a job that had a 600-page statement of work to re-cable a single floor of a university and connect it to other buildings. We had a staff member performing compliance and validation throughout the project. He inspected cable runs, terminations and performed his own qualification tests to ensure that they matched what we were submitted to. He also provided authoritative guidance when things were not as documented or changed were to be communicated. He also provided security for some areas where non-staff could not be present without an escort. At one room he sent his own staff due to proprietary equipment in the room that was not allowed to be viewed or accessed or operating that required special procedures to depower or otherwise accommodate. They also ensured that a paramedic was on site during the process since staff were always at risk of a fall hazard, and in some cases required climbing skills and harness while transitioning through a central tower. We have also had elevator specialists to assist running through elevator towers as well.

PWingert
Автор

make these type of videos you are great

BaranMedia-official
Автор

My #1 rule is tools tools tools. Have them all ready to go on hand. Worst thing is when you have to waste time hunting down a tool.

Henry_Jones
Автор

Hello, I'm in collage, I'm just learning about Straight cable, Crossover cable, and Cable drop. I got to do all of those hands on and it was fun! got any tips?

TheNiceGuy
Автор

Pulling cable has been a job of mine for YEARS. Im wanting to learn more about licking in contracts for my local school district. I work for a company that does that now, but Im an installer looking to venture out on my own. Most times were the only company to show up on a walk through for the bids!!! Almost ALWAYS! Id show up and bid on then if I knew how. Any help? Thank you!!!

INFIDELAA
Автор

First of all both techs have to protect themselves using all PPE required besides safety glasses. They have to use ANSI 3 or 4 gloves and hard hats. Also, they have to be aware and let somebody about missing bushings in all conduits. This could be easier to to pull cables because they slide better than being pulled on top of the tapes. Other than that, they have good technics💪

Cristian_Breton
Автор

How do you go about find these cabling jobs ? I’ve been helping a company do some pretty big runs of cat6 and would love to get some extra work on the side and maybe even work for myself one day. Any tips on this would really appreciate !!! By the way you did this extremely professionally! You don’t see this kind of work often, especially with just two guys working the job. 💪🏻💪🏻💪🏻

ClydeWheyx
Автор

Never work backwards to the ladder never, safety first!!!

MrBlackness
Автор

You avoid "leap frogging" buy some glowrods! We use them and I never wanna leave them behind now 😂

Dr.P
Автор

Velcro always, never zip ties. It takes the same amount of time, above ceiling or in a closet. Velcro will never pinch cable, zip ties can.

Also, don’t pull through J Hooks, pull in the path way next to the j hook, when done with the run, work backwards, dressing in the cable with Velcro and push any slack back the start of the run.

SteveO
Автор

Im 19 from Texas and jst started working on this I was wondering how much can a person make on this job. Im trying to figure out what to do since im saving up to go to a trade school maybe for a different trade. Very helpful video!

elalejoRM
Автор

Do you certify the runs or just test them? As long as its under 300' (which i can get from foot markers printed on the cable) I dont see the need to certify if it passes a simple cable mapper test since the cables certified from the factory.

Henry_Jones
Автор

So how did all your runs hold up after the users came back to school? Any issues? I had a issue once where my new point of sale systems were super slow talking to the server. Turns out the data runs were 450' long!!! I fixed that with a mini switch in the cieling half way down the run. Turns out it was done by an electrician and he didnt know anything about IT.

Henry_Jones