Talos E3 Mesh - The budget friendly, roomy, ARGB mid-tower ATX from Gamdias

preview_player
Показать описание
This new case provides plenty of airflow, addressable RGB lighting, three 120mm fans, and a tempered smoked glass side into a night package for budget PC building. At half the price of some other competitors, it might just be the case you're looking for to complete your next flip!

Considering one of these? Using the links below provides a small commission to my channel and helps me make more videos!

#gamdias #pcmr #atx #pccase
Рекомендации по теме
Комментарии
Автор

Thanks for this man, I'm doing a build for a guy at my work and this case looked promising but I wanted to make sure this case wasn't gonna be a nightmare to build in lol.

trashasaurus
Автор

Well explained and reviewed. That was really helpful

RoY-GG
Автор

Just picked this case up and a XFX Speedster RX6700. The interwebs says its 304mm long. I'm am going to get it to fit. Both will be here in a few days.

brucemastiff
Автор

we need a video to know how to connect fans on mother boards without argn header, please

SamarianFlow
Автор

I'd say this is a great micro or mini ATX case, cause if you put an ATX motherboard inside the RAM may get in the way of the RAD on top. I've come across this in a lot of Mid Tower cases.

Jseagle
Автор

cant understand how to connect the fans to the motherboard argb header.. it just wont work

Ethan_Mcfly
Автор

great review man. im having a problem with the lights not turning on for the fans. they were just turning on fine but all of a sudden they wont turn on anymore and i dont know why?? i am connecting the sata cable to the psu not mobo.

koala
Автор

Where does the other fan plug go? What does it do?

brucemastiff
Автор

can the front panel be removed? The picture in the site implies that it can come off

potipots
Автор

Thanks buddy, gr8 content! Is this casing's airflow better than the glass one?

woodcutter
Автор

So the case fans run full speed always, right?

ajeli
Автор

Hey John, How you doing?
just built a PC and i stuck on choosing a cabinet its been a week.
It was very easy to buy cpu and motherboard. LOL.
I have msi motherboard which has dedicated 6x sys Fan slots and there are very less options
with cabinet providing plugging fan's power directly to motherboard.
Really dont know the consequences if there would be any.
What do u suggest? does it make any difference powering fans from PSU or should I stick to MSI cabinet
which has options in its fans with pwm + ARGB header.
Thanks in advanced.

avisingh
Автор

Will it provide enough airflow for rx 7600xt and ryzen 5 5600?

bogdanbogojevic
Автор

Hey man, nice review!
I have one question, my motherboard doesn't have an argb header. Is it possible to light up and change the light color using the case switch? How did you do that using only a psu? Just connecting the sata power cable lights up the led and changeable by the led switch?

md.imdadulhaqueemon
Автор

I have this case in white, its lovely, one thing i found out, if you press and hold the LED button on the case it hands control of the fan colors to the mother board, nice if you have a LED light on your CPU fan so you can match them, however i couldn't find a way to control the fan speeds, any ideas.
I also put an ASUS TUFgaming B550 Plus WIFI ii ATX and it fitted great, I put most of the cables through the three slots just under the right edge of the board, no problems.

graynoone
Автор

Hi! Question, is there any dust filter in the front of the case for the keeping out the dust?

G.Centurión
Автор

can you control the led case fans with mobo software?

masklask
Автор

is thia hub a dust filter after the mesh in front?

gabfff
Автор

Is there a way to convert the SATA power connector into a 4-pin system fan connector?

newnumide
Автор

Can someone please help me, I got this case but the fans aren’t spinning and there’s no led. I have the msi b550 a pro

Prestigevitality