Lenovo Smart Tab M10 Plus TBX606F Display Replacement

In this video im doing a screen replacement on a
Lenovo Smart Tab M10 Plus / TBX-606F

================================================

================================================
Tools that i use frequently that are Ali-express Affiliate linked

This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.

my go to glue for almost everything now days!

Used to open ipad and remove glued back covers on phones

When using the heat gun near sensitive parts, its best to cover them
With this to protect them

The usual tape i use on most repairs, on screens

For things that need more Stick!,usually on tablet digitizers

A Similar tool kit to mine, that i use for those random screws that you dont normally see

My Soldering Station i use, so far it has been good

This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase

Advanced readouts of power draw on devices

A Simple Amp tester to see if your charger is actually putting out power

The Black Tweezers i use in my videos

This is the same as the metal pry tool i use, different brand printed on it

A New Version of the pry tools

This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed

The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job

One page i go to when I'm curious what new repair tools are out is:

[juliogonzo]

Thanks for the video. Helped me replace the one in mine. I just used a heat blanket and used the two sided tape that came with it. To get under the screen I used a razor blade to pry the edge up and then used a plastic gift card to cut the glue. The black foam piece on the back I cut under the corner with a razor blade to get ahold of it and was able to peel it off by hand and transfer it to the new screen. Probably should wear safety glasses when extracting the old screen as it is probably going to break a bit more.

[sahanabeln]

Hi. I really liked your video. thanks for that. but in my case i just need to replace the glass and not the whole display. any suggestions on how i could do that?

[DeclanMcArdle-neyb]

Is this the same process for a Lenovo m10 3rd generation tb125fu? Great video thank you.

[azert]

Sorry to bother you, I know the video is a long time ago, but I just found the exact same model and I would like to know how to remove the screen to change the battery, without breaking the tablet screen because I have to use the same one, thank you very much for the video though!

[walsheh]

Just ordered the screen and doing a bit of research. What was the purpose of unplugging the battery? (is this a step I can skip?)

[jackermann]

May I ask where did you get the replacement screen from? I have been searching for months for a screen and couldn't find

[ahrevir]

Hi, thanks for the video. I followed all the steps but the screen is not working. Also, it makes a click sound every 5 seconds. Do you have any ideas why this is happening and how to solve it?

[dogsavage]

Can you put it In the oven at 70 degrees?

[carlosbrigantes]

could you give me the link where you bought?

[TOTINODJ]

i have problem with lenovo. i change display new and flat but not turn on.. help

[israelcano]

Mines just has lines from the inside it’s not cracked

[bqmtest]

How to buy thermal blue pad???, please not use a metal spluged, use alwais plástic. Metal is dangerous to sort circuit