Cisco Switch Stack Configuration

Configuring switches in the stack is one of the important task a network engineer do. This video explaing how it is performed.

[werdna_sir]

Thanks for the video. I had no idea the priority was based on the MAC addresses!

[aquadir]

Thank you very much sir.. easy way understand it m

[vhadzdansalan]

Sorry to ask, I'm just new to this kind of set up. . May I ask What will you get for doing this kind of set up.

[moisesrangel]

Here did you say if I had two switches for example 9200 and I would like to put hem in stack I just need to connect the stack cable and the swtiches automatically formed the stacking? Don't I need to make a previous configuration?

[wesleycosta]

thank you , document of de Cisco, no understand, the video is very simple is the explication easy of the understand

[JKRowl]

Sir. Do we have to reload both switches in order for the change of priority to work?

[shailendrarai]

if i have 6 stack switch and 2nd switch has been down than how to find the faulty switch ?

[jjenko]

what about the configuration please ? does the master configuration apply to all other switches ?

[iankz]

Thanks for your great contents. I have a question. Say we add a third switch to our two members switch stack which its mode is "Bundle" and we want to make it as "Install" mode so it can join our "Install" mode stack. Do we have to change its mode individually and before putting the stack cables on and then connect it to the stack or we can add it as is and make a V-mismatch and then console to the new member and change its mode and reload it ? This area is kinda vague to me. Could you please explain?

And sorry I have to pose my second question that just sparked in my mind. How about the license mismatch? How do we match them? And why the license has to be the same?

Thanks beforehand.

[iankz]

Another question? Are all the files in all the stack members' flashes autogrnarated once the stack is forming? So if we format all switches flashes and only having the .bin Image file, we shouldnt run into any problems right?

[chao]

Hello Network Tutor
Nice video.. i'm new on networking, i'm planning to add a new cisco 2960x on existing stacks. The switch i will add is not new. Do i need to reset it to factory default before it to the stack?thanks..

[vjzp]

how do you identify which physical switch is member 1 or 2?

[jaganu]

how to see running configuration in this stack and how to take console in this stack

[pacoz]

got this message Both links down, not waiting for other switches

[kesaraawinash]

Please reply


1.Highest priority
2. Lowest mac

[ajithm]

existing stack how can we add the switch.!?