RideNow Inner tubes PSI loss (1 week)

[recce]

Been using ridenow for 2 years. Pump up before every ride. Enjoy the ride .. lower rolling resistance and save Abt 80grams per tube

[thebrunoserge]

Once you fill them up you're supposed to RIDE NOW

[tonytypes]

Not bad. Better than tubeless. My tubeless setup looses I think about the same, but having to top off the sealant and cleaning it every few months I'm thinking about switching to tpu tubes.

[bradfordzone]

Have we got to the stage where people no longer wish to pump their tyres up before going for a ride? The weight your saving more than makes up for it.

[ericbarbosatravels]

I have these tubes, like 24g per. I last pumped my tires up in early October and my 28mm tires are still pretty plump, probably still 65psi, down from 80

[nikolaypetrovnikolov]

My set of Ridenow inner tubes has a problem with the valves - they are hissing and leaking air and the tubes can not be properly pumped.
This brand of inner tube is kind of crap!

[samuel]

Good tubes, ride and feel. Problem is they don't last. The valve goes bad after many inserts from the pump head.

[xkabauter]

I had mine for 2 weeks in my commuter bike. Was sitting on a bench. Suddenly poof the air was gone. The tube had a fissure at the upper side facing the rim tape near the overlapping segment. No puncture. I tried to patch it, but a blister appeared a few centimeters farther that burst at 30psi. Another tube I had installed in a kids mountain bike held air only for 2 days, afterwards it was flat.

[EGregorio]

I use 28s and tpu tubes and i have the same issues no matter the brand. I think the problem is the valves w

[Megamenx]

Is there any minimum pressure for TPU?
Mine was snakebit/pinch flat when i filled about 80psi on 25c using Continental Grandsport...

[setsuna]

I had a terrible experience using tpu inner tube especially this ride now brand. Ive used this brand for almost a month and every week i need to change both tubes because they always explode even though i have 2 sets of rim tape on my rim. I don’t know if maybe they aren’t designed to be used for fixed gear bikes as i often bunny hop and hop skid or maybe they are just bad quality. Also one time i just took a sharp turn and then poof my inner tube exploded so i went back to using butyl tubes as they are more long lasting tho they are heavy compared to tpu

[Eirikkinserdal]

the revoloops lose about the same in a week. but tubolito (mine atleast) lose none in a week

[chelmitchell]

Love mine. I top them off before each ride, like all other tubes 🤷‍♂️

[ignaciogps]

I used to have even worse problems with tubolitos. I changed the cores and pressure loss is not zero but really low.

[gerrysecure]

I have light 70g butyls pumped to 6.5 bar at 25mm and I don't pump more than once ecery 2 weeks, if at all. Also I don't need to charge anything but my garrmin. New tech keeps you busy.

[XN]

Good thing I'm using schwalbe extra light butyl tubes for mtb. Wouldn't like to pump every bloody day. I like 21psi

[johndef]

Their supplied patches dont work for me. Hold air at home then work their way loose during ride.

[seahawks-tzkr]

Can you Tell me the saddle and saddle bag Name?

[aurelioramos]

Any observations on pressure loss for those who ride wider tires and lower pressures? I would expect PSI loss to be lower with lower initial pressure, but I'd like to see if this is true?

[Lonwolf-gsjz]

I’ve fitted two of these both went down before I even got on the bike so they all went in the bin absolute crap