Diesel injector successful removal. HYUNDAI I-LOAD

preview_player
Показать описание
The primary method we use to remove a seized injector, minimizing the chance of damaging the injector or the motor. this method does not just work on Hyundai injectors but most direct injection injectors used in both petrol and diesel applications.

Contact Information
WEBSITE
FACEBOOK
BUSSINESS CONTACT
02 9907 6662
1/2 Paton place, Balgowlah NSW, 2093
fault
ute
car
truck
speed
power
loss
slow
scv
suction control valve
fix
diagnose
mechanic
motor
race
fast
fuel
diesel
mitsubishi triton
mitsubishi triton
4WD
toyoyta hilux
hyundai
surging diesel
lack of power
diesel common rail
high pressure common rail
1800rpm to 3000rpm
idle iratic
diesel problems
nissan diesel
ford diesel
Volkswagen, BMW, Fiat, Hyundai, Hyundai iload, Hyundai H1, Mazda, Mazda BT50, Diesel Injectors, Diesel Piezo injector, Common Rail Diesel injectors, Common Rail, Mitsubishi , Mitsubishi Triton, DeCarbon, DeCarbon Induction system, On Car DeCarbon, Induction clean, Diesel induction clean,
Missfire , Lack of power, No power, Running rough, Hesitation, High pressure pump, No pressure, common faults, Diesel injection test bench.Toyota, Toyota Prado, Toyota Hiace, Toyota SR5, Toyota HiLux, , 2.0litre, 3.0litre, 3.2litre, 2.5litre, 2.8litre,
Volkswagen T5, Volkswagen transporter, Volkswagen caddy.
Рекомендации по теме
Комментарии
Автор

Finally some one with the right tools for the are SERIOUS!!!

markderoche
Автор

Anyone know if hyundai did a better job building the newer 2.2 td in the Staria?

vindiesel
Автор

Un placer colega donde puedo conseguir ese puler

davidcarshop
Автор

When you replaced these did you have to code the injectors to the ecu? I just had them replaced and it's still blowing black smoke on heavy acceleration and I'm unsure if they coded the injectors or if that's even something that could happen when they aren't coded

Capturedxtaters
Автор

My van does the same thing, we have replaced the washers but haven’t changed it, needs reseat or may be it is compression rings stuffed?

mishakul
Автор

Did the puller has done something to remove the injector??

eduardodaquiljr
Автор

Is there a video that shows how you cleaned out the hole?

SwoonMotionography
Автор

Hey all, just thought I'd share my issue with the Hyundai 2012 Diesel Iload. Had a lumpy idle when in gear (sounded like it had a cam), black smoke on take off, vibration on freeway when trying to speed up, shudder on take off. Turned out to be 1 bad injector. 2nd one in from the front. Found by comparing fuel return, the bad one had alot of diesel coming out the return, other were just a couple of drips. Changed and it fixed all the issues above. Just my experience and hope it can help someone with similar issues.

andykay
Автор

Which one is injector relay for this car

patrickndleve
Автор

How did this van end up after the reseat/reseal job ? Running good now ?

jnewts
Автор

Hi
Are you able to tell me the injector retainer clamp bolt torque spec on a 2010 i800/i-Load?
Thanks

totalcranker
Автор

Bagaimana cara nya, untuk memasang dudukan alat pembuka injector itu? Bisa anda memberikan video detailnya, untuk memasang alat itu?

bengkelmobil
Автор

$6500 for that injector puller...FARK!!!

bigfella