NEMA 17 Stepper Motor Control using L298N Arduino tutorial

Stepper Motor Control using L298N Arduino tutorial

::::::::::: SUPPORT CHANNEL ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Don't forget to subscribe!

[festerbestertester]

Still an awesome video - solved my problem. More importantly, uses the best music track ever, none of that wack electronica rave junk that usually gets pumped out. Kudos.

[DomBurgess]

Thanks for the video! I have an Nema 17 hooked up to a L298n and an Arduino. I have no issues operating it, but I'm having problems powering it. If I use a 5v 1a supply, it works but torque is low. If I use a 12v 2a supply, the torque is great, but the L298n pulses ever second or so which sends power to the motor. It doesnt appear to actually turn the motor, but it makes a buzzing noise which is VERY annoying. Do you know why I'm getting this pulsing from the driver?

[terrys]

Now just wire in a variable speed controller and could be used on a camera slider?

[douglanders]

Finally the first tutorial with actual code that works! I've been through a number of them where the code ultimately fails.

Thanks!

[alfredh]

Thank you for this helpful informations! Please let me ask a typical "Beginner-Question": I want to include a Potentiometer or 2 Switches (clockwise/counterclockwise) for controlling the NEMA17. How is the best way to integrate/connect? Have I to Change something in the Sketch? Thank you for your helpful answer.

[caxio]

Hello, my L298 gets tremendously hot as soon as connected to the Pins 8, 9, 10 and 11 of the Arduino board. I use L298N with a Nema 17 45Ncm 1.5A 12V and identic wiring as shown by you. This has quite some effect on the step motor after 30secs that get noisy then stops working after 30secs. Thank you for any hint.

[suvobratasil]

Kindly tell me how to program stepper motor to make any specific number of revolution in clockwise direction and then the same number of revolution in anticlockwise direction continuously. And also how can I vary the speed of revolution. All the programming I am getting is about single revolution in clockwise and single in anticlockwise direction.

[sen]

If I want to use the joystick to do real-time control, what should I do?

[atulkhatavkar]

How to determine A+&A-&B+&B- mine is just vibrate and not moving. Nema 17 5.6kg motor driver and connected similar to you. Power supply 2amp 5 volt please help

[josephdavid]

I used an arduino i previously had used to play the game of thrones theme song on a piezo buzzer and when i turned it all on the motor started humming the theme song

[dablet]

has anyone gotten this L298N+Nema 17 to work with ESPHome or Tasmota? if so, could you please show the wiring diagram as well as the codes?

[Lann]

I'm sorry but you can apply ~35V on the 12V input? what?

[theenlightenedone]

Great out my ps2 controlled car I used a l298n but the motor over heats fast any advice

[blackfaithdoom]

I am sorry, i am wondering which model of a 3D-Printer we are seeing in the Video .

[luqmananuar]

Sir... The link i cant access.. i really i need this sketch T T

[Jk-rmsx]

Could you provide the parts used to incorporate the belt driven linear actuator?

[bobsoto]

Unable to find the sketch. link is broken

[kiranshashiny]

Did not work for me !

I think the newer motors need A4988 .

[joaocamiloulhoa]

it is possible to control microsteping?

[asimov]

I'm using 5A 12V power source and 1.68A stepping motors, but they are only vibrating, tried all wires combinations, do you have an idea to make it work ? :(