Bells Of Steel Lat Pulldown Low Row Machine | ASSEMBLY

In this video, we’ll show you how to assemble your lat pulldown and low row machine like a pro in just ONE hour! From tools you’ll need to pro tips on keeping things smooth, we’ve got you covered.

This machine is perfect for your home gym equipment arsenal, helping you hit those gains faster!

#latpulldownmachine #bellsofsteel #lattower #assembly #latpulldown

CHAPTERS:
00:00 - Low Row Machine Setup
00:10 - Essential Tools Required
00:41 - Frame Assembly Instructions
02:05 - Weight Stack Assembly Guide
03:30 - Selector Rod Installation
06:22 - Cable Installation Process
09:04 - Top Plate Assembly Steps
10:25 - Seat Assembly Overview
12:20 - Bottom Plate Assembly Tips
13:04 - Pulley System Assembly
14:00 - Final Thoughts and Summary

Check out the Lat Pulldown:

For more tips, deals and the best home gym equipment in the world give us a follow

#garagegymreviews #latpulldown #lowrow #bellsofsteel

[ninie]

Before starting I recommend taking 5 minutes to look at the part list in the instructions and number the parts on the hardware package accordingly. This saved me lots of time.

[gumpdeltatauchi]

Excellent tutorial. I feel very confident that it’ll go together with no issues now. Just have to wait for UPS to unscrew themselves and deliver my last three boxes. Thank you!

[dennismiddleton]

Video helped with assembly so much. No matter how many times I run cables on machines like this, it always seems harder than it should be. The video saved me some re-routing I'm sure!

[MichaelNelson-el]

Yes it helped Tremendously Excellent Video Instructions!

[GarageGymLifeMedia]

Your stuff is modular so is it possible to integrate the lat tower into the back of the Hydra rack?

[MBFOffGrid]

One thing that would be really helpful is if the hardware was numbered also, kinda have to guess what is what.

[Chris-wvcx]

At 11 minutes he says bolt 4, but it should be bolt 5.

[theAVR]

Just assembled mine. This video was clutch.

Instructions and packaging feedback:
1. I love the printed to scale ruler in the instructions, and the way the nuts/washers/bolts are shrink wrapped. I wish every company did this.
2. Drawings show all washers and nuts on same side of each bolt. Should be bolt+washer, dotted line, frame component, dotted line, washer, nut. Currently its bolt washer washer nut dotted line, frame.
3. Maybe I didn't see it while reading, but at the top of the listing of bolts, in big ol' bolded font, I'd like to see required socket dimensions (19mm vs 17mm etc)

[Metalhead]

I love how they skip the beginning steps, I just got mine in today and they forgot to include the instructions so this video would’ve been helpful if they started from scratch 🙃

[mrkang]

@10:50 made me laugh... nothing like that teenage boy sense of humor coming out :-) Very helpful vid, thank you.

[tadleyironwood]

What would be cool is if there was an attachment for the low row to be used for leg extentions by sitting the opposite way on the seat.

[TCP]

Nice video guys thanks for the tutorial 😁👍

[fwiffo]

The video definitely helped me but I still took like 3 hours because I’m slow 😂

I waited to put the top two brackets for the top pulleys. I found I could put on one side, slide the bolts through and that would hold it up there well enough to put on the other side.

[gmyza]

Building the olympic plate loaded version I would highly recommend a deadblow hammer. The chrome center tubes in my case were a good 1/8th too long (eyeball estimation) after inserting the bottom rods, I was afraid I would have to cut them but the hammer helped

[michaelpietrzak_in_SD]

Really tough trying to decide between the Titan low\lat tower and the Bells. Wish it was 3x3 like the Titan and also had the roller on the back of the seat for doing low curls.

[BrendanBryce]

At 1:20 he says bolt #1 on top bolt #2 on bottom (they are both bolt #1 bolts)

[ronbondoc]

Does the low row cable slide left and right and lose track from pully?

[aristotlejb]

Just started assembling mine and I wish you guys have properly numbered the bolts. They are just all bunched together without anything identifying which ones are bolt 1 or 2.

[themarmot]

Before getting the weight stack in place, put the bottom wheel inside the guard. Hot a good shoulder burn restocking all the plates 2 times....

[blazefury]

I can't get the weight stack and the band pegs installed at the same time. Even without the screws in the band pegs it makes my rods for the weights too long by about a half inch. Not sure what to do.