BMW F10 & F11 Front Air Vent Trim Replacement (Step-By-Step DIY)

Quick DYI Tutorial on BMW F10 & F11 Front Air Vent Trim Replacement

BMW F10/F11 front air vent trim/grille link:

[projecteuroau]

Don't push from the passenger side as suggested. You have to align the front vents first and then you can clip in the rest. Just a tip from somebody who has removed that piece about 500 times haha!

[MsAngela]

I did this last week and totally worth doing. I’m sure it’s quicker for someone more knowledgeable but I am here to encourage the diy-era … Take your time and it’ll look brand new!

[twinscoupe]

I finally did bro . I’ve had this vent in my trunk for like a year . So glad I did, your video is the most detailed one . Thanks

[jack_rider]

Thank you dude, just did mine and I really appreciate the step by step, one thing I will add. There is a clip holding the wires in place (start/stop, AC) and that clip needs to be pulled off too with a tool or fingers

[swagboss]

Thanks for the tutorial…I had some difficulties with the existing vent pieces but quickly resolved 😂..Looking fresh and new again!

[TheDiljit]

Thanks for the tutorial. I was able to do this in about a half hour. I lined up the clips, started in the middle then left right.

[jontherolla]

Thank you for taking the team to creat this tutorial for us! We appreciate you!

[gargamel]

Awesome. Thank you. Just replaced the vent. The thing that gave me trouble was the same as yours. Good to know that the clip needs to go above the triangle shaped piece but below the T. I had it on twice below and above and neither worked well.

did the same thing with the phone holder. Now I have one that clips on top and sticks to the dash.

[nelsonchukwuelue]

Thanks for this video. Gave me the knowledge and confidence to replace mine.

[tomasito]

This video is very useful. Thanks for everything. From Texas.

[gaby]

Thanks for the explanation.. it is very helpful, i had the same problem and i replaced the part today.. perfect..

[lovejahandlive]

super video i had anxiety before watching this, having just ordered a replacement! Thanks

[kplay]

Great video. I just experienced a similar situation with a vent clip on phone holder. Thanks so much 👍

[CosticaKristianDiVogli]

Updates: what's in here 7 minutes, took me 70 minutes; but I've done it properly.

[ajmaes]

Great instructional video, gonna replace my center vent now with confidence!

[Sevenduece]

Woo hoo replaced mine easilly, thank you so much for this vid!!!!

[dorelgradinaru]

Also the white conection has a safety pin at the back as well. 😊

[henriett]

Lifesaving video. Thank you. Extremely well explained. 😊

[alphazaro]

Thanks. I have absolutely the same trouble.

[Marvindorfler]

Was going to replace mine until i saw this. I assumed you could just pop the plastic heater bit off and clip in the replacement. But after this, ill put up with my broken one ( which a phone holder did cause )