How to install Handle Hygiene unit using the switch mechanism

If your door opens away from you then you use the switch mechanism to install the Handle Hygiene unit.

Please note inside your Handle Hygiene unit there is key, a trigger mechanism and switch mechanism. If your door opens away from you, you use the switch mechanism. If your door opens towards you, you use the trigger mechanism. There is another video with showing you how to use the trigger mechanism.

HOW TO INSTALL THE HANDLE HYGIENE UNIT USING THE SWITCH MECHANISM
00:00:15 Open your Handle Hygiene dispenser
00:00:25 Using a pliers remove weakened piece and file edges
00:00:34 Clean door with alcohol wipe
00:00:45 Measure out where the Handle Hygiene Dispenser will sit
00:00:53 Attach adhesive patch to the back plate
00:01:00 Stick the backplate to the door and hold firmly in place
00:01:04 Remove cartridge lid
00:01:07 Hang Handle Hygiene Sanitiser Cartridge on back plate. Ensure nozzle is in place
00:01:12 Slide switch into cover and put cover on the Handle Hygiene unit.
00:01:24 Test Handle Hygiene

TROUBLESHOOTING
The unit is not spraying:
*Check to see if you have removed cap from the cartridge

The cover is not fitting on correctly
*Check to see if the nozzle is clicked into place and it is the opposite side to the switch mechanism.