How to clean TURBO without removing !

-----INFO-----
This is NOT sponsored video, I do not own the product

- Product Description:
For all gasoline and diesel turbines.
Usage: Start the engine and let it warm up. Remove the air intake system of a flexible hose located between air filter boxes and turbocharger / intermediate compressed air cooler. Petrol engines set 2000 rpm. Diesel engines left idle, never not to press the accelerator pedal. In warm engine spray directly to the turbine inlet. Spray in short interval in order to avoid or unexpected high Increase engine speed and engine detonation. After injection wait for a turn again to return to the original level. If need that gasoline engine falter click accelerator. Diesel engines Never press the accelerator. Continue cleaning UNTIL worn all 200 ml aerosol dispenser. Leave the engine to idle for a few minutes. Turn off the engine. Re-connect the air intake hose. Run the engine accelerator 5-10 times (max. Up to 3000 rpm / min), or a car to pass 5-10 km (within the limits of 3000 rpm / min.) Before turning off the engine leave few mins to work.

Have any questions?? Ask me in comments !!!
-------------------------------------------------------------
Dont forget to hit *LIKE - SUBSCRIBE* and share with your friends !
-------------------------------------------------------------
Music: Metro - Yung Logos

-----------------------------WorkG---------------------------------

[seismic]

An important point is what codes the car computer is giving to try to diagnose where the problem is first. This method will only have a positive effect on the air intake, which is fine if that is what the codes are saying. As exhaust gas is recirculated, the air intake may get clogged with soot and no doubt this method may help that.

However, I don't believe that spraying in this location would help clean the hot side of the turbo at all. This is where the vanes that open and close are located. For direct access to the hot side, removing the exhaust connection would provide means to spray in the cleaner.



So, in summary, spraying in the cleaner to the air intake will not clean the turbo.

[CycloneCyd]

Although the instructions do say to spray it into a running engine, The cynic in me says they tell you that to get you to buy a new can each time you need to clean your turbo. I have found that if you clean the turbo when it is NOT running, the product is just as effective but far more economical. One can is good for 3-5 cleans at least. I also prefer to clean the throttle body individually.
I have also found (on petrol engines) that doing it the way Wynns instruct almost always brings on the EML as the engine 'coughs', necessitating that you need to have a code reader. My method (see my channel) does not usually light the EML.

[irmantass]

I think you need to spray into EGR return (I see it is blanked) hole to lubricate turbo VNT (wastegate) actuator

[Ripcurl]

Why does everyone have to play crappy ass music during their videos?! Yeah I can turn the volume down not the point

[jakesmith]

When you make a car vid.. keep the hyped up super mario music away will ya

[maxi]

I would not i had high hope with this spray. Next day litrully my turbo blew. I did exactly what this video did. Huge regret. I would not do it honestly. You can use forte injector cleaner that will help your engine. Dont this anything will help turbo unless you recon. Hope this help everyone!!

[mesasartworks]

You have to use it on the Hot side of the turbo (exhaust) instead waste it to to intake and make possible engine damage.

[ianwinter]

Surely the pressure on the turbo actuator when reving it when standing still isn't enough to allow the waste gate to open and clear the crap out of there?

[PenPond]

Best to clean Carbon is use Graphenizer, with out opening the Engine. or any screws...

[andriusbrikas]

Is it no need to up rpm over 2000/min in the moment of sprying, because in idle mode turbo isn't spinning

[megstuporno]

Would be better if you would disassemble turbo, and show difference before and after the cleaner ;)
Did you feel Any difference?

[praneetsingh]

How can you prove it cleaned the turbo, from a spray can?

[georgemixalakis]

We got big diesel trucks we prefer to get the turbo out and sent it for repairs if needed and they clean it because we don't want to risk our clients engines to blow mid work so yea if you want to clean your turbo by spray do it my opinion is just get it to a professional or if you know how to fix/clean do it all cars Are amazing expect mini smarts and really small vehicles

[SomeRandomDudeNamedDan]

How many rods did you just bend with that hydro lock?

[makistattoo]

In the case of a turbo intercooler, what is correct to do ??? we need to decode the intercooler ???

[XXSNIPERUKXX]

Surely it would have more benefits if sprayed into the vanes and not burned off through the engine?

[hellrot]

I did this to a Saab 9-3 tid 150bhp same product . My turbo was lazy and I could not hear it . After this my turbo was alive again I felt the strong boost and sound. I did same thing to 4 cars now . Try for yourself its good 👍

[tennisfitapp]

Hi what pipe did you disconnect? My turbo veins are probably sticky as stopping my VGT actuator - so shall I try to clean like you and you think will help? Thx

[harithanaranpanawa]

Can we spray it throw the air filter box?

[darooe]

NIe ma szans wyczyscić tak turbiny, bo zawsze jest zapieczona gorąca strona a podajesz to na zimną...