Furitek Momentum ESC Final Version Unboxing & Setup Tutorial

The final version has arrived!
Unboxing & tutorial on how to install, connect, calibrate and set this ESC.
Thanks to Furitek for providing me this test unit.

Distributors:

Time Stamps
Intro 00:00
Unboxing 00:17
Soldering 04:31
Battery plug 05:55
Installation 06:26
Android app 08:28
Connecting car to app 08:53
Throttle calibration 10:06
Motor direction 10:54
Low voltage cutoff 11:42
On-off button setup 12:43
Test run 13:42
Release date 15:19

Music Provided by YouTube Music Library
Swing Theory by Freedom Trail Studio

#Furitek #ESC #MiniZ

[BeaversHobby]

Recording the audio live cut down the filming time significantly. However the audio is still a bit iffy so please bear with me until I get a new microphone.
There are a few steps in the tutorial so click the time stamps to skip to your preferred topic.
Intro 00:00
Unboxing 00:17
Soldering 04:31
Battery plug 05:55
Installation 06:26
Android app 08:28
Connecting car to app 08:53
Throttle calibration 10:06
Motor direction 10:54
Low voltage cutoff 11:42
On-off button setup 12:43
Test run 13:42
Release date 15:19

[thomasbuser]

When it is aproved by Master Beaver then it is a must buy. Thank you Master Beaver for your great and very useful content.

[ulmwurttemberg]

I was going to post a question to Chan RC or the K989 Facebook page but i iknew, I KNEW, if i skipped around in your videos i'd find my answer. Note to self: battery plug is JST-PH 2.0. Send thank-you note to Beaver.

[beesod]

Love you Beaver! <3 thanks for all the inspiration i get from all your videos!

[fwfefrtefdv]

Good video!
A very technical hobby

Must have electronics, electrical and mechanical engineering and even IT knowledge to play this hobby

[addictedrcs]

Hey there my YouTube friend, your information is awesome and very well presented too.
Your English is amazing also, very fluent too my dear friend.
Your definitely the go to guy for any kind of help.
Very informative indeed matey.
Please do keep up the good work fella.
A massive thumbs-up to you.
I really enjoy watching your videos mate.
👍 👌 👍

[shasyb]

Hello old friend been a subscriber 3 or 4 years now. Back when you modded 989. So i had a DRZ 1 was last chassis, when they first came out. Never could get that thing tuned and drifting. So recently I saw one of your new vids for XRX and now im back from 2 year lay off. I finally got that car too drift then grabbed a XRX, so few more chassis later and now I have a Drift Art 2 from chanRC. The hobby has come along way since first 1/28 DRZ. So after ordering DA2 i saw this review, I order one. So had to come back to this video too connect blue tooth. Man your vids are a big the reason i got in the hobby, and have got me out of a lot of situations i couldnt figure out. Thanks Bro ps if you do a video for servo programing AGF A11CLS thats last part of this build.

[Corruptlol]

Great video as always now it's up to them to make this actually available

[kamelrf]

Thanks! as always, everything is useful! Beaver, please review esc rocket mini 18A.

[extremecaliber]

Heya, I picked up this ESC that comes with the 3500kv motor, it's the first version but for some reason I just can't get it to connect to the motor. It just blinks slowly, not the rapid one where it doesn't find the receiver. I'm wondering if you ever encountered this issue and if you have some advice on troubleshooting if it's either the ESC or motor that's defective. Thanks!

[fabrizioformenti]

Hello Beaver and thanks for this video. If I have a motor (which I believe is a PN racing one) having M1, M2, M3 on it instead of A, B, C... Is M1 the same as A in your opinion?
All of this thinking about correct soldering to the Furitek esc.

[ieism]

This looks exactly like the crawler ESC, I wonder if I can just change the setting in the app to configure it for drifto

[fabrizioformenti]

Hello Beaver! What if I have a PN 2.5W chassis and have to solder positive and negative wires separetely? Does that furitek plug allow for that (to part the two wires and solder them)?

[DanPRC]

Very informative video. I have a couple Furitek systems in my crawlers and just picked up a 1/24 drift and was debating on getting this esc. And what gyro are you using?

[danibacsur]

Great Video! What do you think? Which is the best drift rc if you can only choose one?

[ErCaAi]

I'm relatively inexperienced in RC, but I'm interested in this ESC. Can I use it with a normal receiver? The connectors you use are the JST Mini, i only have normal Radio Control here.

[jeffreymeeks]

Hi Beaver, I just got a Furitek Momentum ESC and soldered it up to a Yeah Racing 3500kv motor (looks just like the Surpass Rocket motor). I'm getting a lot of cogging and sometimes the motor stalls and whines, and telemetry shows the RPM maxed out even though it's not moving. Has this ever happened to you? Did you have to play with the settings at all with your ESC? Do you still feel like this is the best, even better than DasMikro?

[THEFIINALBOSS]

Hey Beaver. I have a Gl receiver and a Kyosho ex6-r receiver. How can I pair them? It’s so confusing. Please help me and thanks.!

[JStudio-RC]

Hi Bro, I also buy one Momentum with my Driftart2 and I found something interesting. If I kept battery plug with ESC after it shutdown, after hours the battery will certainly run out of energy.
I already modified the button function as you did, however I can tell it's not really "off" while keep the plug onto.
Have you met the same issue yet?

[JStudio-RC]

I'm wondering if it's able to start-up the ESC power just like PS3 or switch that assigned button on the transceiver