1999-2003 7.3L Powerstroke Transmission Cooler Installation Guide by Mishimoto

preview_player
Показать описание
1999-2003 7.3L Power-stroke Transmission Cooler

MODEL: MMTC-F2D-99SL
•Direct fit for the 1999–2003 Ford 7.3L Powerstroke
•Proven +10°F (+5.6°C) drop in transmission fluid temperature with no additional fluid pressure drop
•No modification necessary for installation, functions with all stock equipment
•37-row stacked plate fluid cooler provides larger surface area over the stock 9-row transmission cooler
•Transmission cooler core has a 265% increase in core volume compared to the factory 9-row transmission cooler
•Increases transmission fluid capacity by 1.0 qt
•Mishimoto Lifetime Warranty

Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.
Рекомендации по теме
Комментарии
Автор

Installed one of these on my 7.3 excursion pulling my boat from sc to the keys in July highest my trans temps reached was 155

davidbrewer
Автор

Just ordered mine. Using my 7.3 excursion to tow anything gets my transmission temps dangerously high. I find it remarkable that just an extra quart of transmission fluid would make such a difference. Should I do a transmission flush before or after I install the new cooler?

mattk
Автор

how do you bleed the trans line going to the cooler to help with oil leaking when line is removed? Or, is it easier just to let the little bit drain out?

ahug
Автор

Can this be made to fit the obs trucks with e4od

johnscheffler
Автор

so much easier jist to pull the bumper

matthodgson
Автор

Has anyone bypassed the radiator feed lines and just tied into the two lines in the frame ! If so what were your results? Some are saying the transmission run a bit cooler.

LemonySnicket-EUC
Автор

Will this cooler fit on a 2001 ford f350 v10 since it's got the 4r100 transmission

chrisobrien
Автор

please help so on my 2003 f250 i need transmission lines and i found my two transmission lines do they connect to my transmission cooler as showen in the video because i cant see the transmission cooler infront of the grill or is it hidden because i got told the radiator is the transmission cooler is that true or false thanks

sublesszero
Автор

Can it fit f250 V10 2003 6.8L gas engine?

vai
Автор

Is this a bigger cooler than the one made for the 6.0?

woodbutcherjc
Автор

how many quarts does trans cooler hold

alandeamer
Автор

why did the mishi cooler look extra fucked on install?

mikeohland
Автор

My 7.3 cooler didn’t come with lines!!!!

IndiansAuto
Автор

Does this cooler bolt on to the header panel or where

bobodine
Автор

Sorry to say that while may be an outstanding product, the video’s instructions don’t correspond in several key areas to the architecture of at least a 2000 Excursion. Extra shrouding in different locations, less-accessible upper cooler mounts...only use this video as a rough guide!

BlueLabelDrinker