Yihua C245 Solder Handle For 982 Station: Unboxing & Testing

Buy C245 Handle Here (Affiliated):

Buy 982 Solder Station Here (Affiliated):

---

---

#yihua #solder #c245

[grahamhall]

Thank you for this post. I have the YIHUA 939D+ III EVO and it is really powerful, very pleased with it, can easily create a big pool of solder on just copper clad board. I have seen other reports of the problem you have with this the 982 on You Tube. I was considering buying this unit but not now. Saved my money, thank you.

[evgenyaleks]

It looks like 616A lacks power even with biggest tip. In video shown more powerful handle 9071 but it would not fit 982 (has different plugs). Would be good to know is there other handle, possibly with remodeling to work with 982, otherwise has little use unless for tiny parts/ surfaces.

[Chris_Grossman]

I was interested in the 245 handle. Thank you for saving my time and money!

[Mohamed-Saied]

Have you found the cause of the problem? Is it from the handle or from the station itself?
Because I am waiting for the same station to reach me and I want to buy this handle

[DimitrisDiamantis-fz]

hello, is there a handle for these tips for the 995d + station ? thanks in advance

[deterdamel]

I checked my C245 on my 982. Inside the station is a R005 resistor to messure the current that goes throw the heater by the MCU (btw. the build quality of the 982 is good and it's based on an ARM-MCU). I have messure the voltage drop on this resistor with a Fluke F8050A. The peak/average value was about 20.x mV (= 4A) with the C245 and about 7.2mV (= 1.44A) with the C210. The PSU seems to be a 120W device (Aifen A9 using the same transformer). This means the 982 should drive C245 pretty well. I paid 43€ (incl. VAT and quite fast shipping): Highly recommended.

[grahamhall]

Did you contact Yihua and did you get the problem solved?

[ianallen]

The C2455 will only work in tyhe black units, not the green ones.

[smokehead]

Hi, can You just measure wattage taken with 245 handle?

[leso]

do you never pre tin & use flux ??

[robhood-co]

too bad was hoping that the c245 was good. do you have a link to the hakko handle and can ot be used with the 982? tak

[deterdamel]

(Too sad.. I was on the way to order a second station of this type.)

Update: My two Yihua 982 has very good performance with the C210 and C245. I got two 982, even the rated 40W 982 hat 120W PSU inside. Newer units seems to be rated 120W.

[Desenrad]

The struggle with flow might have been due to you holding it too long and without flux. from what I saw flux is the magic that instantly melts solder wire. This is also why people prefer to use Rosin Core wire so that as it melts it releases flux inside the wire and helps melt much easer. But when it comes to using any sort of flux the best way I seen it be used is with high heat but in small burts. heat the pad with iron and simply press the solder wire into the iron so it melts into it. Maybe the way you were holding it there for a long time was the reason it did not work so well.

-FYI I'm no pro I only recently started learning from people who are pro's.

[ClaraTony-mz]

Brown Daniel Hernandez Gary Miller Karen