The Driveway - Replace or Upgrade Your Engine Mounts

The Driveway Episode 2:
Chris & Curran show you how to install new engine mounts on your NA MX-5 or Miata

Upcoming Video: How to install front and rear lips on your MX5/Miata

Visit us on Instagram @thedrivewaychannel

Supported By :

Music:

[MrEzplay]

Best tutorial on motor mounts for the Miata NA👍😅

[jkail]

awesome. doing mine in the morning. thanks for the quick and informative guide

[danefreeman]

Hey guys, maybe on the next you let us know the amount of torque needs for each nut/bolt. Just a thought

[danielskrskr]

just hit me that drivers side and passengers side are opposite for RHD cars... duh.. but I've never thought about it that way, lmao. You were saying drivers side but I could see the oil drain bolt and thought you got mixed up but you kept saying driver/passenger on opposite sides. Accent should've given it away. Am I just high? Thanks for the video I'm doing my mounts today and this helped

[Nasonix]

I never got to see how the outcome results were. I'm thinking about doing this on my car asap. i bet them old mounts r beat!!

[Sertao]

How do you know when they need replacing ? How do you know the engine is twisting more under a load ? The hood is down and you can't see what the engine is doing . Is there some kind of test you can do to know for sure if they need replacing ?

[eatthisvr]

iv replaced the mounts but i cant get the engine to drop back down on the passenger side (exhaust side). drivers side moves up and down np in the chassis rail slot but the passenger side it stuck at the top and wont budge

[anybleepinusername]

At 2:51 you mention the “crank angle sensor”. Don’t you mean “cam angle sensor”? Isn’t the crank angle sensor on the lower front of the engine beside the crankshaft?
Thanks.

[PaycoTsunami]

Is this the same on NB Miatas?Looks pretty similar but can't really find a video on it except one of two dudes complaining the entire time with a shaky camera.

[Datboiiwotone]

Have you ever ran into an issue to where the engine is sitting close to the heater core lines? I just got done putting the engine and trans back in and my engine is sitting to far to the drivers side (USDM) the passenger side is jacked upward in the slot and no matter what i do it wont drop down to level everything out