How To Change Filament On Your Creality K1

I show How To Quickly And Easily Change Filament On Your Creality K1

-~-~~-~~~-~~-~-
Please watch: "Bambu Lab AMS First Print with Bambu Lab P1P: The Ultimate Multi Color 3D Printing System"
-~-~~-~~~-~~-~-

[joeylopezdesign]

Note- you should also unlock before pulling the filament out- notice there’s a little bulb of filament more than there would’ve been, this helps avoid clogs. Learned this way back on a makerbot, and saw it repeated by Creality and community

[ashleysdprintshop]

Keep up the great content. I don't have a k1 but I think beginner steps such as this helps everyone interested in the k1. Will you be getting the k1 max when it releases?

[lucasgarelli]

Unlock before remove the filament, the melted part can remain inside the extruder.

[ariquois]

Mine didn't retract so that I could pull it out from the back. Had to take the tube out from the extruders end.

[Microarmor]

I've owned this printer since the beginning of the year, and it has never retracted the filament to where a can grab a bit of it at the loading tube and pull it out. Every time, I need to remove the tube from the print head. After the 20 to 30 rolls I have printed so far, that connection into the print head is getting g torn up. I noticed you have a different gear box than mine. Yours has a blue clip. Mine doesn't. Mine has a metal thing with teeth that bite into the tube. BTW, great video, as this is the 1st time I've ever seen or heard of how it is supposed to work.

[Ronoaldo]

I ended up extruding the remaining piece after my K1C Max run out sensor paused because if the retract function was used it would not be at the point where I could pull it 😅. So I just melted the remaining and pushed the new PLA trough

[arbabaziz]

Do we have to unlock the extruder, I do mine without it and it works completely fine so far.

[siberia]

Thank you perfekt so I can start. I am a little bit worry about.

[timhoover]

Mine used to extrude for the first few weeks. Now it is a POS... I can manually extrude with the latch open, but the extruder can't push PLA through even at 240 C. E-mailed support 2 days ago, but nothing yet.

[rodpsaint]

Mines won't extrude at all, just got it last night, never got it to print

[BreakingElegance]

pain in butt to do all this once you have a bambu with AMS this seems to be a hassle.

[josefsteiner]

its a shitty rip off of an x1c i have both and the k1 homed to hard and dammaged my bed now it wont turn on my x1c has done 5000 hours with out one fail i think i know who wins here

[RobBob]

You can't even string a proper sentence together 🙄 🤦‍♂️