Godox Xpro II vs Godox Xpro I, what's the difference?

A comparison between the older Godox X-pro radio controller and the newly released Godox X-pro II.
By the way, the password for the app connection is six zeroes or 00 00 00.

There are a few minor differences between the Variants. The Sony variant has an option for the autofocus assist lamp called AF with 2 sub-options Mirrorless and DSLR, which the rest do not have. The Fuji variant has an option called Shutter with 2 sub-options curtain and leaf.

00:00 Intro
00:14 Physical differences
01:50 Menu explained & shared similarities.
05:55 What's new on the X-Pro II
08:33 What's new on the main screen
09:14 Connecting to the app

THE FOLLOWING LINKS ARE AMAZON AFFILIATE LINKS, purchasing through these links will cost you nothing, but It will help the channel.
Gear used for this video:
Zoom f6 -

Software:
Adobe Premiere Pro
Adobe Audition
Adobe Photoshop.
Thanks for watching!

[waisetsubunsho]

This video is infinitely better than the actual manual for the thing.

[paultolenaar]

I wonder if using the Legacy Centre Pin Setting, setting the flash to full power, and using the delay timer, could make long burn high sync possible, a trick I used with two X1t's on top of each other. You'll gain almost two stops in comparison with HSS...

[paulconnors]

This is/was super helpful. Thank you.

[hazybrain]

Thanks a million, this helped a lot !

[MikeT-yy]

😊Has the xpro11 got the new metal hot shoe foot on the Sony model, thanks

[sjim]

Actually, has the new version solved the issue of not taking rechargeable AA batteries well due to the difference in voltage?

[SDW]

One issue I had with the XPro-S was that it simply did not work in TTL mode. Exposure was completely unreliable. At least that was the case with my A74 & A7R4. I would like to know if this problem was resolved with the new trigger. Anyone know for sure?

[ranjankmsphotography]

Very informative❤👍 Can you confirm if the Sekonic lightmetre syncs only with the one model mentioned in the menu(L 858) or it works with other Sekonic lightmeters too ?

[brianrowland]

Thanks for a fairly comprehensive video
At one level an amazingly sophisticated controller but not for the faint hearted.
And arguably more complex than it needs to be for many users.
I didn't see discussion on clarifying a compatible Godox transmitter is required for YOUR camera.

Subscribed!

[duoimperial]

Hello, first of all, thank you for all the content you share. One thing regarding this GODOX XPRO II, the modeling icon that usually appears at the bottom right does not appear. Why could that be? Thanks in advance and greetings from Spain.

[felipeibarjeppesen]

Hi Florin I have a quick question: I got the xPro Trigger and the TT-685SII, but I'm having trouble setting the flash to slave mode. I can't seem to switch the mode from Rx to slave on the flash. Do you have any ideas about what I might be doing wrong? Thank you! 🙌

[geribrn]

how is the hot shoe compared to the older one? is it using a metal base already?

[ezhkov_ph]

does the autofocus backlight work on mirrorless cameras in the new version?

[TimKimzey]

Great comparison and information - Thank you! Wondering about the new Legacy or Center-Pin setting: in this mode, does it allow the TX to be used across brands (as all use center-pin for the firing trip in Manual)? Seems it would be great to bw able to use different cameras with same controller, obviously without TTL control though. Anyone tried or can confirm?

[chargerrtjoe]

Purchased the Xpro ll paired with tt600 so far so good. Need help to figure for shoot with higher shutter speed. Thanks

[mvjphotographie]

Hello . Regarding sync between the xpro2 and the l858d can I adjust power control from the xpro2 and it will sync with the Sekonic. Or is this mode the same as the app mode?
I prefer setting power with the xpro rather than the lightmeter. Thank you

[madxngai]

Nice and informative.
How is the dial compared to the previous one? Is it shaky and not firm enough like version one?

[redgate]

Love my version 2. Would have got X2T, but gets in the way a bit when shooting and being a bit older now, screen is a bit small. For me, build quality is fine.

[michaeljemery]

Stil waiting for Godox to do the high contrast white on black displays that Profoto use.

[frits]

Selecting the hotshot to only the centre pin solves another problem: With the TTL pins activated the white balance gets too warm. I use a hot shoe splitter for Canon on my Nikon camera and XProN to avoid this.