CL90 Restoration Part 1: Starting Tear Down of a Classic Bike!

CL90 Restoration Part 1: Starting Tear Down of a Classic Bike!

I begin #disassembly of this classic #honda bike! I remove the seat, gas can, kick start, air filter housing, and others! I’m excited to share the entire #restoration with you all!

#motorcycle #honda #cl90 #restoration

[rizingsonmotorcycles]

It's a 1967 CL90. The wiring harness date can sometimes be off by a year, as it is made by Sumitomo which is a supplier for electrical harnesses for many of the Japanese bike manufactures back in the 60's. The CL90 was made from 1967-1969, and replaced by the CL100 or CB100 which came out in 1970.

[TheCbxmaster]

Go to the $.99 store get a large flat plastic container, then go to hardware store and get miotic acid then set your parts in there for like an hour only metal parts no aluminum and the rust will be gone. Gas tank put 30% vinegar gallon jug in that let that sit for a couple hours then rinse the acid. Make sure you have another container with water and baking soda mix, after you pull out the parts put them in water and baking soda mix. Be sure to soak the bike down with penetrating oil before you go to sleep at night. That way when you get up the next day, everything will come loose easier