Fixing Thrustmaster 458 too stiff brake pedal (Remove 1 spring)

Originally there's 2 springs on each side, the brake side springs are bigger and stiffer. My recommendation is if you use shoes, use the brake springs and put 1 on each side. If you don't use shoes, take the smaller gas side springs and put 1 on each side.

[bikelyfe]

You can remove the pedals with 2 screws then slip the cover over the pedal shafts

[xxskatrbtchxx]

This vid was really helpful thank you. What you can also do is have one heavy spring, one thinner spring on the gas pedal, and do the same on the brake pedal so their stiffness is even for both. 👌

[tomhash]

I know its a old video but for the people with ajust gears issue, first you must to screw correctly the sensor right to the gear, screw it correctly bcause is moving with the years( the degree of the sensor afect your gear), after that you can select the gear, make test before to screw everything and dnt forget that the black panel push your pedals when you put it. with the sensor in the good position my gear was 3 for brake and 4 for accelerate.work 100% but test must be done. My english sux sorry.

[isaacreynolds]

you can unscrew the pedals rather then pulling out the bar

[ricardocarvalho]

Do you know in which gear should the teeth be?

[KORBYNZVR]

My breaks just dont work can someone hel

[uhhFez]

I can't even get the bottom to open lol scared I might break something if I pull hard enough to open it

[Stix]

The brake pedal is meant to be stiff so it is more realistic

[ghostgaming--ll]

My brake pedal fine it’s just not working

[diysai]

Just in case this helps someone. You can unscrew the pedals from the arm (I have done this) to take the top part out.