Finishing polish - how to use ultra finish polish Illumina 2.0

Показать описание

The new Mafra Illumina 2.0 refinisher

This new refinishing polish distinguishes itself by having a medium polish cut and an extreme finishing.
The ultra-finishing polishes are usually also composed of fillers that cover the defects obtaining a good gloss.

Our R&D department, on the other hand, worked hard to find a sincere abrasive that would correct the defects without covering them, giving a deep gloss of an ultra-refinishing.

We studied it on different surfaces and hereafter we explain how we did it

On Sticky paint
We can perform a "one step" treatment: cutting and finishing in a single spread
With this polish we can choose a medium hard or medium soft pad.
Just two small pearls dispensed on the pad are enough to make a medium cut.
The cutting potential changes according to how much polish you spread on the pad: you have to well evaluate how to proceed according to the condition of the paint. Never exceed in use.
As always we suggest proceeding gradually: from speed 1 up to 5 progressively
Illumina 2.0 is characterized by a more evident lubrication if compared to Corrector 2.0, but its removal is always quick and easy.

On Pastel Black paint
Gloss and Finishing are essential for an ultra-finishing polish. Unlike other ultra-finishing polishes, which create micro scratches on the surface that tend to whiten, with our Illumina 2.0 and thanks to its exclusive formula, you will succeed in obtaining a sincere finishing.
In the video we have tested it on an extremely difficult paint, a pastel black of a '69 Mustang.
in order to show you the candor of the product, we have also used an IPA (obviously not recommended on such "sensitive" paints).
The recommended amount of product is always 2 small pearls with a Medium Soft pad.

The result is excellent; we have obtained an extreme gloss and an excellent finishing without using fillers or waxes.

You really have to try it!