Next Level Racing GTElite Aluminium Simulator Cockpit Instructional Video

Показать описание

Find us on:

Рекомендации по теме

Комментарии

Going to be a tall order getting this one over the line for my 40th, but I’m going to give it a red hot go. Looks amazing and quite straightforward to assemble too.

tarkan

Changing the order on some of the instruction will make life a lot easier. E.g. butt kicker should be installed before screwing into frame. The easiest way to install the post is to mount them to the connection plates first, then pre-screw w/ T-Nuts loosely, then slide it into the base frame through the front. Same steps should be done on one piece wheelbase plate.

F_e_l

Received mine with the ERS3 last week, absolutely love it.
BUT... Since i'm not that technical at building stuff like this I was fully focused on the manual. Admitting this manual is fantastically easy to read (in hindsight!) it would have been convenient if y'all would have mentioned the placement of ALL the cable management clips, since again i was fully focused on the instructions in the manual and on completion I had to break half of the rig down again to add all the clips. Yes, I know, I might not be that smart and could have thought of it myself, but really, if you're going to sell this perfect a cockpit, with an absolutely noob-proof manual, add the placement of ALL clips, not just the (actually unnecessary) clip on the lower back of the seat... (why is it there anyway?!)

For the rest: Best money I've ever spent. The NLR GT-Elite is definitely worth the money! 😍

VisitorOf

Hello NLR, the Fanatec DD Pro wheel has mounting points for their included t-nuts that are M6 (countersunk) bolt compatible, but the cockpit only provides M8 bolts (p.22-23). I couldn't see any M6 type mounts in the kit nor in the manual (p.6-7). I also watched the video but couldn't see anything at 6:13 that would help. Am I missing something? No big deal as M6 countersunk bolts are generally available at hardware shops.

PaulF

Spent a couple of hours, and got about half way done (doing this by myself). One thing that’s difficult is getting each arm on the side to line up properly with the t-nuts and with each other, so that the wheel plate isn’t off.

It’s been a constant struggle to make sure I loosen one side to adjust the other side to make sure that the bolts go in smoothly so it’s lined up properly

Also, does the butt kicker seat slider in the front or rear?

samgao

I noticed he put the pedal arms on the top hole while the book and diagram has it on the 3rd whole from the bottom, is their any reason to put it on the top hole?

AFRNick

Can I use this guide to build the F-GT Elite as well?

abs

Whats the height from floor to top of seat (approx) and what's the max height adjustment for the feet? Thanks

MarkNOTW

Hi, what do you advice for my dd pro base 8nw? Front or side mounts?

elninho_k-

My dream...mark my words, i will get there😉

madpower

Does it matter which grooves you put the bolts into on the mounting arms through the side mounts. I've got them in the same lengthy holes but I noticed you guys did one in each.

dano

does anyone know if your able to put caster wheels under it, instead of the rubber foot?

Toxicmastro

Hi Next level racing, just wanted to give you a heads up, that you misspelled Aluminium in the title. Also wanted to say, just got two wheelstands 2.0s. One for my Dad's house and one for my Mum's as I loved it so much.

Elioncars

Will you guys be adding lockable casters to the accessories list for this cockpit? Also, if one wanted to purchase the profile to complete the shifter mount, are you guys planning on selling said profile and hardware in a kit?

Hailstrom

Are those 4 rubber ball(legs) adjustable? How high can it go ? 1 inch ?

TheRhythmrecall

Hi me again :P I am now having trouble with the nylon washers and bolts that go through the side mount into the front mount. They keep bending and flexing and are not tightening into place. Any tips?

dano

Does anyone know if my Logitech g pro wheel will fit this before I continue building

joedough

Is anybody know how to mount a Logitech g pro wheel? These holes are not lining up

joedough

I don't see why anyone would buy the FGT Elite over this? 🤔

doggiehowzer

Next Level Racing GTElite Aluminium Simulator Cockpit Instructional Video

REVIEW - Next Level Racing GT-Elite Aluminium Profile Cockpit

Next Level Racing GTElite Aluminium Simulator Cockpit Instructional Video

The Aluminium Profile KING 👑 | Next Level Racing GTElite Review

BEST SIM RACING SETUP? | Next Level Racing GT ELITE Review + Fanatec GT DD & LG OLED 48GQ900

Introducing the Next Level Racing F-GT Elite Lite Aluminum Racing Simulator Cockpit

Next Level Racing GT Elite Impressions

Introducing Next Level Racing GTElite Lite Aluminum Profile Cockpit

Next Level Racing F-GT Elite Aluminium Simulator Cockpit Instructional Video

NLR F-GT Frame Only With Elite Seat 1 Review

Next Level Racing GT Elite vs Trak Racer TR120 - ALUMINIUM COCKPIT COMPARISON

Is the Next Level Racing GT-Elite the Ultimate Mid-Range Sim Racing Cockpit? (Review)

Next Level Racing GTELite lite Instructions

Introducing the Next Level Racing GTElite Ford GT Edition

Introducing the Next Level Racing F-GT Elite 160 Aluminum Cockpit-

Next Level Racing GT Elite Lite Review: Affordable Excellence

Introducing the Next Level Racing GTElite Cockpit- Start your Elite Journey

Affordable Mid-Range Sim Racing Rig 👀 (Review)

The ONLY Sim Racing Cockpit You'll Ever Need (And It's NOT Overpriced?!)

Next Level Racing GT Elite cockpit review: Is this the best mid-range sim racing rig?

Building the Ultimate Sim Racing Setup: Part 1 - Next Level Racing GTElite Cockpit

First Impression of the GTElite Cockpit with 13X iRacing Supercars Champion @MadisonDown

Next Level Racing Elite Series Introduction

Next Level Racing F-GT Elite cockpit review: The ultimate sim racing rig

Next Level Racing F-GT Elite Simulator Cockpit iRacing Edition