Removing Mineral Deposits From a Slow Flushing Toilet Toilet Maintenance

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

It is not recommended to pour hot water into a toilet. The hotter it is, the more it will melt the wax gasket, and it can crack the porcelain bowl. If you flush your mop bucket water down the toilet, it's better to wait for the water to cool or add cold water to it first.

robinfavron
Автор

What mystery chemical is this? Bleach? Acid? Ammonia? Gatorade? 😆 Would have been nice to at least show what it was

mb
Автор

In the video, he is using CLR (Calcium Lime Rust) Remover which you can by at any hardware store. I would use about 1 cup and if you have a major buildup of mineral deposits, I would let it sit for at least a few hours. I had a major blockage and let it soak for 5 hours and cleared up the calcium. I did use a brush to scrape some of the calcium too. Then my toilet had a strong flush again.

jeenmin
Автор

Impressive how he hid the important part of this video from us all the way through. I even went back to watch it a second time. Wonder what else I can not learn tonight. Frick!!

onebadboy
Автор

CLR=
Gluconic acid
Citric acid
Lactic acid
Glycolic acid
Sulfamic acid

AlBundy
Автор

Nah I go straight to muriatic acid m. That shit works way better than CLR. Make sure there’s enough ventilation when you do and don’t inhale the fumes. Few minutes soak then scrub.

RyanDeguzman
Автор

if i pour it in the bowl, will this go to the inside of the tank as well? or should i pour it directly into the tank?

archangelmusic
Автор

Use a pumis stone and carefully remove hard deposits. Elbow grease without heavy pressure. Do not scratch porcelain or you will soon need to replace the entire toilet.

warriorsgreatness
Автор

Going to pour 5 different chemicals down the toilet at once. If that doesn’t work. Putting the blame on you 😂🤣 “CHEMICALS”

sleeks
Автор

Not sure if I want to put hot water in my toilet tank

jslute
Автор

You did not told what chemicals did you use to remove calcium deposit.

mariancedro
Автор

So basically just grab any chemicals, go it .

fleetcaretrucks
Автор

Let the CLR in the toilet bowl for a while ? how long is a while, 30 mins, 45 mins, 1 hour, 2 hours ? i Need Help !

NightSister
Автор

This really worked I used it on my toilet it's working fine now thank you sir 👍🏾

lettermano
Автор

But you're not going to tell us what the "chemical" is??? And even hide the label on the jug you're

DonTruman
Автор

What’s the point if you aren’t showing us what you are using in the first place smh

Its..KaylaK
Автор

Christ on a crutch, you people! It’s a frickin jug of CLR! Are you blind?

calartian
Автор

You didn't say how much to initially put in

cinnamonstafford
Автор

55 comments and 35 subscribers, YOURE DOING YOUTUBE WRONG DUDE!

levitheonlylevi
Автор

You did not mention WHICH CHEMICALS TO USE - This is YouTube - its alright to tell us.

roseanne