Kuka Dry test 5 Axis Milling with Fusion 360 PostProcessor

one of the first test runs with my vintage KR150 Kuka KR C1 with win95
Running code generated with Fusion 360 and Kuka Post.
3+2 Axis milling.
Rotary table not yet enabled.
Need servo and controller for it, but don't have it yet.

[Eddy_AREA]

If you have a Kuka with newer controls and want to get rid of it, please contact me.

[Jonathanist]

Very cool! I am trying to get a 3+2 working with my setup as well. I have a KR60 and a DKP400. If you get it working I'd love to know how it went

[yoshiyo]

I am about to buy a Kuka or Funac robot.

According to the "pre-purchase" technicians, I have to buy a software to check the machining strategy, that there is no "joint limit" or anything else.

In your case, and tell me if I'm wrong, you made your part in Fusion, and you generated the machining strategy directly in Fusion, post processed and sent directly to your robot afterwards?
No additional software or anything?

Can I ask you for the "Kuka Post"?

Do you have an email to ask you some questions?

Thanks to you
Mathieu