Furitek Cayman ARTR Ultimate 1/24 Kit! Brushless,carbon fiber chassis and aluminum upgrades!

Checking out the new Artr kit from Furitek! This new ultimate 1/24 crawler kit has a bit of everything. Brushless motor,aluminum transmission housing with metal gears,aluminum shocks & links etc. let’s check it out!

Furitek Cayman available here

Furitek Lizard Pro esc here

Flysky micro receiver i mentioned here

Wheels I like for these builds here

My favorite tires here

HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!

AFFILIATE LINKS BELOW

Horizon Hobby affiliate link

Amainhobbies affiliate link

FMS Affiliate link here

Amazon affiliate link

RCAWD affiliate link here

Use 2fmrc discount code at FMS and get a $10 discount when the order amount is over $50 on new trucks and accessories!

Fcx24 Front Portal axles found here

FCX24 Rear Portal Axles found here

Metal portal gears found here!

FCX24 $6 Motor upgrade found here

Extended links for the fcx24 found here
Link kit available here

Purchase PARTS for the Fcx24 or rtr and help support the channel here!

FCX24 Portal Gears included in this set

FCX24 at amainhobbies here!!!

Fcx24 on amazon here!

High clearance links used found here

RC4WD Stamped steel Wheels used found here

RC4WD Scramblers found here

Other upgrades found here

Injora brass wheel rings found here

Wheel hex extenders used found here

Stock Scx24 driveshaft (long) used for rear

FMS FCX24 available here in yellow

FMS FCX24 available here in blue

FMS FCX24 available here in red

Don’t forget to use the DISCOUNT CODES BELOW

Furitek discount code is 2fmrc

Injora Discount code is 2fmrc05 for 5% off

MofoRC discount code is 2fmrc

Fullsendrc discount code is 2fmrc

RcAWD discount code is 2fmrcawd5 for 5% off

TOOLS I USE FOUND HERE

T-handle wheel wrench I use here

WORK MAT I USE FOUND HERE

MIP .050 hex found here

MY FAVORITE TIRES BELOW

Injora Crawl Master

Power Hobby Trail Warriors found here

Rc4wd Scramblers

MY FAVORITE ELECTRONICS BELOW

My favorite SERVO for the price (agfrc)

Another great BUDGET servo here (Emax)

My favorite ESC found here

My favorite BRUSHLESS motor here

My favorite BRUSHED motor here

SHOCKS I USE BELOW

FRONT SHOCKS
Injora internal spring shocks (40mm) running on the gray Injora body truck found here

REAR SHOCKS I usually use some sort of long travel shock like these

MY FAVORITE WHEELS BELOW
Treal 1.0 22.4g beadlocks found here (select your color)

Injora 1.0 wheels found here

Hard Park Crawlers 1.0 wheels

BRASS PARTS I USE BELOW

Treal Brass Steering Knuckles found here

Injora brass wheel rings

Injora brass kit including steering links!

Cheap Brass Kit with all parts I change found here

HIGH CLEARANCE LINKS HERE

Injora links (select your length)

STEERING LINKS HERE

Injora Aluminum Steering links here

[ezekielmcginn]

That's nifty, I do sort of wish there was an option to opt out of the motor and transmission but it's also kind of cool that it's included.

[Shane_S.]

That is freaking awesome!!!🔥🔥Definitely a better option than starting with a ready to run and building it up. Pretty much everything is already there without to much needing to be done. Thanks for sharing Matt👍 Looking forward to seeing it built and running!

[garyclark]

Great idea, I wish this would have came out a month ago before I spent three times as much building one from scratch!

[bouncenerd]

That is rad! I think it’s awesome that they offer a setup out the gate like that!

[toWergOd]

Another Ky guy here, I've looked everywhere trying to get a length on the front links. I'm building a pretty crazy cayman along the lines of your custom build.

[INSIDIOUS-ONE]

This is awesome!! Cannot wait to see running vids! I been wanting to do custom LCG build’s but trying to get info of Facebook is a joke 95% of those groups are toxic & hella negative, there is a few good guy’s that help but most are pathetic. That’s why I’m so grateful for guys like you, texoma rc, cape crawlers & some other’s that put out content to learn from! Definitely getting one of these! Great vid!! Keep it up!!💪🏼👍🏼

[kennethsutton]

Perfectly built, thanks for showing us this pre built-up rig. I know I'll be ordering one asap.

[backroads_rc]

another great vid Matt. This thing looks awsome for us builders. I wish it was just a kit, u put it all together you're self.

[FlailinMonkey]

This ARTR is awesome, and I'd say the price seems fair for what you are getting. My only disappointment is they didn't make the rear extended. Hopefully they make a version with the extended rear or at least offer some extended aluminum links as an upgrade.

[GrimJerr]

I was looking at a Bronco for my next 24, now I am looking at a Bronco body, and this is my next 24 😍

[trailwomanrc]

Sweet! The first to offer longer rear linkage with this quality is getting my money ASAP. I've been waiting. I saw these links weeks ago in their first chassis promo images.

[animalpix]

😃YES.... Thanks for making this happen!!! I truly believe if you didn't share your thoughts and ideas non of this would have come to fruition! The Companies VALUE your input as do all of US...
👍👍👍👍👍

[toycoma]

Good value. Micro komodo motor, mount, and trans by itself is already $99. For another 100 bucks you get a complete chassis! I would swap out the trans and put the Hot Racing overdrive front transmission.

[jeffmackovitch]

That’s how I was gonna setup my new 1/24 FMS Monster truck.
It’s like everything I want and if it includes 2FMRC chassis. Then Hard YES!

[andrewrichey]

Yeah that’s what I am waiting on also, some of those steel ring and pinion, that’s a awesome chassis dang it

[geo]

Rear wheel steer would be a good option 👌

[kennethrobinson]

I just want to see it in action. Looks amazing!

[texomarc]

That’s rad! Exactly what I wanted to do. I gotta get one! Thanks for sharing brother!

[jr]

Can’t wait to see you run this setup!!

[nlhpr]

I jumped in last week they sent the email out on the 21st