Building the Ultimate Powder Coating Hopper - Ep 79

Cut Lengths -
Tube with holes 4.25"
Tubes inside container 4.25"
Tubes outside container 8"

Follow their Instagram as well @hightempmaskingsupply

For chemical stripper contact Matt at Express Chem 314.266.4600 tell him I sent you

Powder Suppliers -

You can subscribe to my channel for new videos of powder coating and wheel builds as well as special projects rolling thru the shop

►Follow me on Instagram @unknowncoatings

Shop Info:
2451 S 600 W
Suite 500
Salt Lake City, UT 84115
[phone]

[ricklonetti]

Thanks for the video! In case anyone is cracking the cap when drilling the holes, put duct tape on top and in the inside of the cap. Then drill the holes. Once the holes are drilled, remove the tape.

[accordingtoabe]

please consider doing a beginner setup instructions video for first time sandblasters and powder coaters. sick video

[toolsandtoys]

Thanks bud. Im going to round up parts today. Thanks for the UKC Army group. Great group of folks willing to share advice.

[kierankammerer]

Thanks for taking the time to do this!

[johnreimer]

Hey. Great video but i have a question. How do you set this up with your machine? I would love to see how this is actually being used on the machine. I have one that has a big hopper for 25lbs and i would like to switch it to only using these little ones as it looks easy to switch to different colors. If you have a short video explaining how this is hooked up to your machine i would like to see that. Thanks in advance!

[nextlinkzcustoms]

Very informative, buddy like how you go in detail for detail.

[JoshTolbertUrbana]

Perfect timing...One of my folks' dogs just chewed up one of my hoppers.

Now, who wants to split a case of 16oz bottles? :D

[JoshTolbertUrbana]

What's the white tubing you're using into the NPT side of the barb fitting? I've tried repeatedly to drill PEX and it's always a chewed-up mess, and your tubing looks a lot more rigid than PEX.

[chrisbergquist]

Thanks for the video! Going to be making a few of these very soon.

[Jean-RobertSutton]

Thank you, I made 5 of them, question can you tel what is the amount of powder you can put in these hopper to be the more efficient ? Like full, 3/4, 2/3 ...

[GoBrokeOffroad]

I found u-line has really nice jars for this. Made a little fluidizer set-up out of a mini jar.

[cliffwalters]

Thank you for sharing. How big are the holes you drilled into the center tube?

[dwdw]

When I drill holes in plastic I run the bit backwards. It melts through and it's really clean and there's no risk of cracking.

[johnnyboy]

It seems like the 1/2” barb fittings you were using for the pickup tube is a 1/2” npt and not a 3/4” npt. My 3/4” fittings were too big for my 1/2” PEX tubing

[caseyjohnson]

Can you tell me the size of the hopper? The link you put has a bunch of container.

[putputskunk]

Hi can this be made for a Colo? Asking because the Colo has 2 lines coming from the unit, not just one..

[boxerc]

"You can tell its just a guy drilling holes" lol!!

[pandasquad]

great informantion thanks for all your videos\

[HarryJMack]

Could someone tell me what those little glass tubes with the powder in them because someone found some and we need to know because last time he found tubes containing concentrated powdered citric acid snd he was going to smash them open we had to call hazardous disposal to dispose of them.

[dale]

Hey bud. The fluidizing tubes, how far away from the bottom of the hopper are they? Thanks 🇦🇺