Ram 1500 Maxtrac lift kit

Enjoy everyone!!

[hatchback]

great video you helped me pick what lift for my truck

[antoniohernandez]

Just to debunk the rumor, you can run 35x12.50x20 on those Ram 1500 20x8.0" wheels. I have the Nitto Mud Grapplers for about a year now and runs like a Champ 👍🏼

[Thatboyisaac]

Just got this same kit installed on Thursday

[pvflyer]

Looks great! thanks for sharing I am debating on what I want to do with mine.

[juaquiqui-kun]

I got this lift kit for my 2009 ram 1500 done already and the front still sits lower than the back. What coil springs should I get for my truck? I seen 2.5inch but this lift kit lifted the front 1.5inches more than the back so would I need a 1inch coil spring?

[CreativLEEProduction]

Great video and set up. I know you address this in the video but can you tell me how big your tires are (ex. 295x60/20r or 33x12.5/20r). And the size of your lift. Thanks so much.

[winstonv]

Very nice truck!! By the way I have the same exact one as well. I just did the 6” lift, and I had vibration when taking off, but after putting on the spacer on the center carrier bearing it did fixed the problem. But now I have vibration between 70-75 mph only. Did you experience this issue as well ?

[baloo]

Gracias, i just found it on ebay, are the good? For how long you been using those spacers?

[fendyconille]

Hey man great truck. I’m thinking about this kit. How is the angle on the upper control arm. It looked good for the quick glimpse. How is it holding up? have you replaced it since the lift?

[rtoutdoortv]

Did you change out the upper arm ball joint. I have the same thing as you. I’ve been told to watch the upper arm because it’s not set straight the ball joint has slant. Which in time will break soon. Max track has a upper arm to replace it with.

[BassinWCoast]

Looks good man. What kit did you buy? And where?

[koprenc]

I got the same lift I been scared cuz I wasn't sure if the rear 3" would make it too high. Everyone I see seems to go with the 1.5" rear coil spacer Instead of the 3" rear coil lift

[alexalejandre]

Looks awesome do you know the measurements from the ground to the feeders on front and rear?

[jasonlitchard]

I just bought this kit waiting for it to be delivered. Do you know how many of the spacers they used on the carrier bearing? My buddy did the 6.5 inch version of this and used all three on each bolt.

[mikegoon]

Look fantastic. How’s the ride quality vs stock?

[alfredibarra]

Joey acosta. Solo una pregunta. Cuando pudiste los spacers, tuviste que cortar un poco los birlos? O los spacers de 1.5 pulgadas alcanzan a cubrir los birlos. Estoy en el proceso de poner este lift kit a mi 2016 ram y también quiero poner los spacers pero si se tienen que cortar mejor pongo spacers de 2 pulgadas. Gracias

[baloo]

Hi, nice job, i just did this 6.5 maxtrac litf with a 4.5 on the back, im in west palm beach florida, una pregunta, where did you get the spacer for the back? And how much? I can get it any where, not even at 4 wheel parts store. Please let me know. Thanks in advance

[raydelgaray]

Estoy tratando de hacer eso mismo en mi truck, podrías guiarme cual es el lift kit que usaste por favor ?

[RickySlatton]

Did you notice any power lost running 35s? Also, are you running 3:21 gears?

[moctezumaRevenge]

Just out of curiosity what kind of mpg you getting with the truck. I want to do it eventually but probably going to run 33’s instead on oem rims.