Mini-Split Remote Functions - Part 1

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

*Solid, **Fastly.Cool** and gets the job done. For rooms where window-mounted air conditioning is not an option, this works very well. Easy set up, rapid cooling, and great design.*

ИванБалан-ир
Автор

I’m already confused at going through the different modes. What do the different symbols mean? What are the different “modes.” There are no words on my remote. Only symbols

pioneerhomefarms
Автор

great video, a lot of good info. How do I get my mini split to stop when set temperature is reached and then start again when temperature drops below chosen programmed setting? Your video says if I use "auto", it will work at factory default of 78 for AC. That is way too warm at night in Florida. A regular AC unit starts and stops based on a temp setting. How do I do that here? Also, what can I use to tell me what the temp is in the room? Do I need a separate thermostat? Can I get a new/different thermostat that will be wireless and show me temp in room and work the mini split?

michaelmcnamara
Автор

Thank you for the information can I add a detector sensor thermostat, for energy saving when we are not in the house or if we are on vacation ?

ednasdaycare
Автор

you need to SLOW down the visuals when going through the "mode" button process & explain exactly how to change the time & utilize/disable timer. Is there a more detailed written manual link than the overall manual with install info etc which i do not need? thanks

edmundwynne
Автор

My unit is set at 74° and it works fine, the only thing is that when it turns off it takes a long time to start running again. If I switch to the auto option will it be better and will the intervals between on and off will become shorter? The temperature outside ranges around 30-40 degrees during this time of the year where I live. Link for a manual will be helpful🙏😄

JorgeDiaz-boy
Автор

how about the "I feel" button and the "temp" button and how to make sure the "timer" is off? you went over the most common sense buttons!

debfetsrn
Автор

I Have 2 of the Nortek Split Type Heat pump. I lost both remotes, where can i go to buy new remotes? My model is GHH12(3.5)LUK4DH

ozuoonyewuchi
Автор

I'm curious what the temp button on the right is used for?

taexplorations
Автор

How do I get the heat on I have two installed hooked to one condenser

threemusketeers
Автор

When the unit is set in "Auto" mode are the set points of cool and warm adjustable??

jeffcanyafixiy
Автор

Thanks for the video. I've had my unit for about a year and love it. Recently I had to change the batteries in the remote and it seems like the functions aren't working properly. My question is..when I have it set on cool mode shouldn't the unit turn off when it reaches the set temperature? I'm going to unplug the unit and put new batteries in the unit today to see if that resets anything.

arizonamassagepro
Автор

How do you set the TIMER ON and TIMER OFF in order to get the unit to turn on and off automatically at preset times? I have tried multiple times and cannot get it to work!

dennislenahan
Автор

What does a "cl" display mean when I turn off my Aurus minisplit?

carolleemoates
Автор

I had a LSA4DL2 mini split installed their is FO displayed on the unit dash what does that mean and i can't get to change it

LopeNieto
Автор

How do you switch from celsius to fehrenhet

deborahagoates
Автор

Thank you! Most of the videos I found on this subject were not in English!

christinek
Автор

What is the I FEEL button for? On mine, it is called Ahorro (I'm in Mexico). Ahorro translates to SAVING. Should I have it on or off when only using the dehumidifying feature? I'm looking for the least expensive way to cool down my house. Thank you for your time!

karyngreen
Автор

Excellent. Thank you so much...finally I understand!!!!😀

Автор

Possible to add a link to the written literature for the remote? Does the unit fan continue to run when the unit is set to "Auto Mode"? Thanks in advance.

jamesdardon