Serial Flash (SPI) Memory Interface with STM32 | STM32 Microcontroller project | SPI Protocol

The objective of this project is to demonstrate the interfacing of a Serial Flash Memory module (e.g., SPI-based Flash) with an STM32 microcontroller in Proteus. The system will enable the STM32 to read, write, and erase data in the external flash memory using the SPI (Serial Peripheral Interface) communication protocol.
The STM32 will use the SPI protocol to communicate with the serial flash. The SPI bus typically consists of four signals:

MOSI (Master Out Slave In): Data sent from STM32 to Flash memory.
MISO (Master In Slave Out): Data sent from Flash memory to STM32.
SCK (Serial Clock): Clock signal generated by STM32.
CS (Chip Select): A signal that activates the flash memory chip.
Applications:
Embedded systems where large amounts of data need to be stored externally (e.g., data logging, firmware storage).
Systems requiring fast access to non-volatile memory.
Development of memory management routines in embedded applications.

or whatsapp us on [phone]

Join our telegram channel: stmetatronics