Most Amazing Gooseneck Hitch for OEM Puck Systems! Gen-Y Offset Hitch!

GenY GoosePuck Offset Hitch Adapter

#rv #towing #trucks
BigTruckBigRV LIFE Channel: @BTBRV LIFE

Links to many of the accessories I review and use from etrailer!

RV Towing Upgrades
RV and Trailer Equipment Upgrades

Must Have Equipment!

Truck Upgrades

Sponsored items may be in this video. Always research multiple sources before making a purchasing decision. As an Amazon Associate, I earn commission from qualifying purchases.

[scott]

JB, the T handle for the Ball bearings, pulls up the entire way and turns 90 degrees to help it drop in.

[daysday]

I am a truck driver.
I have been a truck driver for over 40 years.
I have well into 3 and a half million miles.
Well pin Should be 1-2 inches in front of the rear axle.
So you have steering weight.
By moving the pin back you are taking away from the steering axle.
Which makes the front of the truck lighter than it should be.
That's How people get in Rick's.
Thank you

[DSeely]

I towed my 5th wheel 3, 000 miles with it and it was awesome. So nice not worrying about turning in my short bed Ram 2500.

[samueljeschke]

I have a ram shortbed 3500 and have been using this for the last 5 months and has been a game changer on being able to get away from a slider hitch and use the Reese goose box on my solitude. Can’t quite get a 90 degree turn but can get extremely close and in no situation has it not been enough clearance as long as using a little common sense

[MrOddsmurf]

You should get on a CAT scale with your dump trailer and test and see how much it affects weight distribution

[DSeely]

Next time, pull the T-bar all the way up, then rotate it 90° so it’s stays up. Then it’ll slide right into the hole.

[raybroome]

Thank you! That is exactly what I need. I have a Tommy lift that extends my bed and it really gets close to my trailer.

[mikecronk]

My gooseneck ball is centered on the axle. That's how I got the truck. When I mounted the 5th wheel rails, I moved it forward of center by about 2 inches. That way, more of the weight is dispersed over the whole truck instead of everything being on just the rear axle. Believe it or not, it handles better and I don't have a problem with clearance. 2003 Dodge dually. 36' camper.

[kennankivell]

I haVe been using one for months in my Ram 3500 standard bed. Love it. Zero issues so far. Much better cab clearance and tailgate clearance. Worth the price. 3121RL Montana with a goose hitch like yours.

[scott]

Love my Gen Y GoosePuck on my 2022 F350. Along with using my Goosebox.

[michaelmartin]

My Grand Design came with a Zero Point Turn. The weight of the camper is directly over the axle and I have more than enough room at 90 deg. I also traded my 2500 Dodge for. F250 and I have 3" more clearance over the bead, a big win

[joemunoz]

I have this setup in my 2020 duramax ccsb and it works great.

[officertwentynine]

Problem solved thank you for showing off this product. I was struggling trying to fit a weather guard tool box and 50 gallon transfer tank in my 22’ 6.5 foot super duty bed. While still maintaining the ability to tow a gooseneck. Will be purchasing.

[trsdlove]

On semis they make us move our axel back 4-5 inches in certain situations. Since you have the scales, can you scale your truck front and rear axel hooked up to your RV with the gooseneck in the original position. Then scale your set-up with the relocated gooseneck to see how they compare.

[bkey]

Would love to see you put this in a short bed superduty, and see the cab clearance with a goose puck setup, like on your rv. We haul with a short bed F350 and are stuck with a slider hitch.

[josephsouza]

Nice review on the Gen Y offset hitch adapter!Maybe that Texas heat contributed to the expansion of that pin sliding in the hole.On building engines, we used to put wrist pins in the freezer so they would (push right in), that was on a 426 Hemi blown injected funny car application.Obviously couldn't do it in this application, maybe a little spray refrigerant would help.

[backfill]

Thanks Gen Y for fixing a problem. But the best answer is remove the Kurt factory junk and replace it with a B&W hitch. I personally have broke 3 of those factory goose neck hitch’s pulling a perfectly legal 5 horse with living quarters trailer

[mccarterjg]

The factory goose hitch is actually about 4" forward of the axle center line, so the shift is less than being made out

[hoosierrealtor]

It's easier if you pull the t-handle up and rotate it 90° when lowering and removing. I really enjoy it on my 2022 F350 short bed, it allows me to leave my Bakflip on while towing

[ShopJock]

This is one of the reasons i like the Anderson hitch. It shifts the trailer a bit back. I want a goosebox for simplicity but i dont think i will gain any usable space when hooked up. This ball setup is unique though