How to Replace an Outboard Water Pump. Yamaha 15HP

How to Replace an Outboard Water Pump. Yamaha 15HP

In this video i replace a water pump on a Yamaha 15hp 2 stroke outboard motor.

I used to pay over $200 for this job to be done professionally but decided to have a try at it myself. Total cost was around $30 and took me around 40 minutes.

If you like this video please consider SUBSCRIBING, LIKING, LEAVING A COMMENT & SHARING.

Thanks for watching. 😄🐟🐟🐟☀️🚣🏻‍♀️☀️🐳🦈
#outboardservice, #outboardwaterpumpreplace, #yamaha15HPwaterpump,

[jimmincher]

Thanks for the great instructions. Knocked the job out just as you showed!! Thanks for your time!! Jim

[SailingAndInvesting]

The best video for this project!! Thank you so much for sharing and showing how easy this is.

[HaswellTravelled]

Wonderful step-by-step guidance on the pump replacement. Well done, my friend 👍. Big like and full play. Thanks for sharing and enjoy your weekend 😀.

[cbensch]

JUST what I needed. Couldn't figure out how to release the shift linkage on my 2000 9.9. Same design as yours. 1:23 was all I needed!

[benjaminross]

Hey mate thank you for your knowledge and effort with the video

[johngalea]

Bloody well done mate. Helped me heaps!

[fiskfabriken]

In the service manual for my Yamaha F9.9A it says those bolts for the pumphouse should have thread sealant Loctite 572 on the m. Not Grease.
Nice video. Thanks!

[DarinSullivan]

I was just thinking about this the other day - thanks again!

[covertgreen]

Mate your awesome. Thanks for the info. I’m trying to find out why my yamaha 15 won’t pee. I tried to see if it needs unblocking, no, i tried pumping air, no, i unbolted the plate bolted to the side of the motor where the pee cones out from and cleaned it out somewhat but still no. 😢 now I’m going to try what you’ve done here on this video. Wish me luck fingers crossed 🤞

[PeterGauci-dcim]

Hey mate great video very helpful! Just wanted to let you know that there is another seal on the impeller housing that should be changed, it’s a large o’ring beween the housing and the s/s plate below. Thanks champ

[RyanIngleton]

This is a great video on how to change this impeller. Hopefully #yamaha see this video and decide to sponsor a free upgrade or trial mate.

[thirteengirls]

Thankyou friend, we have a 15hp Yamaha on our tinny, this may come in handy one day, we hope not, but it may 😘😘 looks successful good flow, no prostate problems there 😳😂🤣😭😭❤

[followthesun]

Thank you for this great tutorial :D
Will come in handy one day 🌞

[asnail]

Simple job but my problem the top nut on the gear changer was seized and I snapped it off inside the nut 5 minutes into the job I’m guessing a major repair is in order

[edhiestand]

Have a 2005 50 hp Yamaha 2 stroke that is not putting out water from tale-tell, could impellor be the problem? Have checked the hoses and they are clear as is pick up at bottom of the motor.

[hijrahbru]

Adakah mesin yamaha 15pk yg seken mau dijual, saya mau beli buat mancing....