HP LaserJet M252 M274 M277 DUPLEX Maintenance Kit Fuser Replacement Instructions RM2-5583-MK

Today we will be reviewing the removal and installation process for the HP LaserJet M252 M274 M277 DUPLEX Fuser Maintenance kit RM2-5583-MK

HP M252 M274 M277 Maintenance kit Contents
(1) RM2-5881 Cassette & Bypass Separation Roller Assembly
(1) RM2-5576 550 Sheet Feeder / Tray 2 Pickup Roller
(1) RM2-5577 550 Sheet Feeder / Tray 2 Feed Roller Assembly
(1) RM1-5583 Fuser
(1) RM2-5906 Secondary transfer roller

RM2-5583-000CN is compatible with:
HP Color LaserJet Pro MFP M277dw
HP Color LaserJet Pro M252dw
HP Color LaserJet Pro M274d

Start by making sure the printer is off for at least 15 minutes and unplugged. Approach the printer from the front and open the tray door.

Repair Notes
There is no Page count Reset instructions for this printer.
125,000 page yield
This fuser and kit is available at in an number of different options at metrofuser

[lewisbrown]

Gotta love that HP makes things easy (sarcasm). Thanks for the video. Unfortunately we already have 3 M277's, 1 M477 and 1 M577 in the office...

[hichamz]

Hi, with more comments explaining the procedure and the components roles and the link with the fuser(for example)it will be a very good job, thank you

[sespider]

Nice video.
Maybe I missed it. But where is the ink reservoir located?

[maciejurbanczyk]

It looks already very helpful, I got the fuser, just about to replace it.many thanks

[markgreen]

Good video. I think I'll just buy a new printer!

[mikailandfadhel]

is this printer use same parts with Canon MF631cn?

[ScalePD]

I have the M254dw, and suddenly started getting a fairly deep crease right down the center of the page (pushing in from the printed side). I watched your video to see if there's something visually obvious but did not see anything... There is a little free floating hinged plastic L shaped piece that is centered inside the rear cover when folded down (opened). Not sure if that could be the culprit. Any ideas?

[bobmickiewicz]

Do you have or could you do a video on how to replace the fusor in a HP Laser Jet mfp m227 fdw

[machew]

I have the m255dw and it is giving me a code saying that the dimm is bad and i can't seem to figure out where the dimm is at in the printer

[hjlkqepq]

Very helpful! Replace my fuser successfully.

[jtan]

What's that teay above the paper Fedder called. The one for envelop

[AlabamaTideMan]

I have a M452 printer and it will not print black on the supply page. I have exchange the toner with another toner and no black print. It will print the black arrow on the cleaning page but it will not print any text on the configuration page, supply page or any other internal reports. I have also updated the firmware. Any ideals on how to fix this?

[Fabianthehunter]

Hey, what is the name of the part at 14:36 you reassemble? I have to replace it and cant find any number for it.
thx

[stallman]

This is why Im, getting annoyed with HP. I remember working on the LaserJet 400 and 600 series. Replacing a fuser was a 2 minute procedure. Open the back cover, remove fuser, replace with new one. Boom your done. This is just ridiculous.

[juanestebanbarrada]

very good the video, very instructive but it would be better if you clean your nose. unpleasant the sound. Thank you

[kbmshop]

why are you doing all it seems like you are using the same parts you took out? Wouldn't it be easier to just buy a new printer?

[StukaUK]

OMG, have you got Parkinson's ? .. I could barely watch you reconnecting the wires.